Phono preamp · AI analysis · Starter, rank 9
ART DJPRE II Review
AI analysis (research): Compact MM phono stage from the studio and DJ world with gain control, capacitance switch and low-cut; basis: manufacturer data.

Summary
The DJPRE II (approx. 70–85 €) amplifies MM cartridges by up to 45 dB at 1 kHz; a control adjusts the level by ±10 dB. The input is 47 kΩ, with capacitance switchable between 100 and 200 pF. It adds a low-cut filter at 22 Hz and a signal/clip LED in an aluminium case.
Specs (public / manufacturer)
| Type | MM phono stage (RIAA) · gain control ±10 dB |
|---|---|
| Entrance | 47 kΩ · 100 or 200 pF switchable · max. 40 mV |
| Gain | max. 45 dB at 1 kHz |
| Measurements | 10 Hz–50 kHz ±0.5 dB · THD 0.01 % typ. · hum/noise >90 dB below clipping |
| Features | low-cut −3 dB at 22 Hz (switchable) · signal/clip LED |
| Output | max. +6 dBu (1.4 V) · RCA |
| Power supply | 7–12 V DC or 9–12 V AC · 150 mA |
| Dimensions / weight | 47 × 117 × 114 mm · 0.57 kg · extruded aluminium case |
| Price guide | approx. €70–85 · Sept 2026 |
Manufacturer specifications (ART Pro Audio)
| Type | MM phono stage (RIAA) · gain control ±10 dB |
|---|---|
| Entrance | 47 kΩ · 100 or 200 pF switchable · max. 40 mV |
| Gain | max. 45 dB at 1 kHz |
| Measurements | 10 Hz–50 kHz ±0.5 dB · THD 0.01 % typ. · hum/noise >90 dB below clipping |
| Features | low-cut −3 dB at 22 Hz (switchable) · signal/clip LED |
| Output | max. +6 dBu (1.4 V) · RCA |
| Power supply | 7–12 V DC or 9–12 V AC · 150 mA |
| Dimensions / weight | 47 × 117 × 114 mm · 0.57 kg · extruded aluminium case |
Source: ART Pro Audio – official specifications · As of 16 October 2026 · subject to change by the manufacturer
Matching tips
- Good fit: MM cartridges on AUX or line inputs
- Good fit: DJ mixer or active speakers with level matching
- Good fit: Turntables prone to rumble (low-cut)
- Less suited: Low-output MC cartridges
- Less suited: Anyone who needs balanced outputs
Technology in detail
ART describes the DJPRE II as a phono preamp for MM turntables that applies RIAA equalisation and raises the signal to line level. Maximum gain is 45 dB (1 kHz); a gain control on the front shifts the level by ±10 dB, and an LED shows signal and clipping.
The input works at 47 kΩ, and capacitance can be switched between 100 and 200 pF. A switchable low-cut filter (−3 dB at 22 Hz) removes low-frequency rumble. ART quotes a frequency response of 10 Hz to 50 kHz (±0.5 dB) and typically 0.01 % distortion.
The extruded aluminium case measures 47 × 117 × 114 mm and weighs 0.57 kg. It runs on 7–12 V DC or 9–12 V AC; the outputs are RCA sockets delivering up to +6 dBu (1.4 V).
What the specialist press says
For this model, the international specialist press evaluated here had not published a review at the time of research. The assessment is based on the manufacturer data.
Who is it for?
For anyone who wants to connect an MM cartridge affordably to a line input and match the level to an amplifier, mixer or active speakers.
What makes this AI analysis special
This AI analysis is based on ART's product page and manual; all values are manufacturer specifications. As of October 2026.
How the score comes about
The index reflects the practical features with gain control, capacitance switch and low-cut at a very low price, with MM-only operation. The Vinyl BotPro Index on this page remains 46 (Starter, rank 9) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology
Sources
Vinyl BotPro Index: 46 (Starter 40–54) · Label: AI research · Sept 2026
Read more: best phono preamps 2026 · What is hi-fi?