Cartridge · AI analysis · Starter, rank 10

Audio-Technica AT-VM95C Review

AI analysis (research): Entry model of the VM95 series with conical tip and interchangeable stylus; based on manufacturer data.

AI research Starter AI analysis Index 43 Prices as of Sept. 2026
Audio-Technica AT-VM95C review, cartridge
Photo: manufacturer Audio-Technica · product photo for illustration only.

Summary

The AT-VM95C (approx. €35–45) is the entry model of the VM95 series, with a conical diamond (0.6 mil) and an aluminium cantilever. Audio-Technica specifies 4.0 mV output and 2.0 g tracking force. As all VM95 models share the same body, the stylus can later be upgraded to elliptical, MicroLinear or Shibata.

Specs (public / manufacturer)

Type / StylusVM dual magnet (MM) · conical 0.6 mil, bonded · Aluminium cantilever
Output4.0 mV (1 kHz, 5 cm/s)
Frequency response20 Hz–20 kHz
Channel separation / balance18 dB · 2.5 dB (1 kHz)
Compliancedynamic 6.5 × 10⁻⁶ cm/dyn (100 Hz) · static 17 × 10⁻⁶ cm/dyn
Tracking force1.8–2.2 g · Standard 2.0 g
Load47 kΩ · 100–200 pF · Coil 3.3 kΩ / 550 mH
Weight6.1 g · Half-inch mount with threaded inserts
Replacement stylusAT-VMN95C · Upgrade to VMN95E/EN/ML/SH
Price guideapprox. €35–45 · Sept 2026
Manufacturer specifications (Audio-Technica)
Manufacturer data sheet
TypeVM dual magnet (MM), half-inch
Stylusconical 0.6 mil, bonded round shank
Cantileveraluminium pipe
Output voltage4.0 mV (1 kHz. 5 cm/s)
Channel balance2.5 dB (1 kHz)
Frequency response20 Hz–20 kHz
Channel separation18 dB (1 kHz)
Compliancestatic 17 · dynamic 6.5 × 10⁻⁶ cm/dyne (100 Hz)
Tracking force1.8–2.2 g (2.0 g standard)
VTA23°
Recommended load47 kΩ · 100–200 pF
Coil3.3 kΩ (1 kHz) · 485 Ω DC · 550 mH
Cartridge weight6.1 g
Dimensions17.2 × 18.9 × 28.3 mm (H × W × D)
Replacement stylusAT-VMN95C

Source: Audio-Technica – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Good fit: Replacement for the AT91 or older entry-level cartridges
  • Good fit: Later stylus upgrade within the VM95 series
  • Good fit: Half-inch headshells and entry-level turntables
  • Less suited: Anyone who wants a finer tip right away (e.g. AT-VM95E)
  • Less suited: Very light tonearms

Technology in detail

Audio-Technica describes the AT-VM95C as the new entry model with a conical tip and as the successor to the AT91 family. The bonded conical diamond (0.6 mil) sits on an aluminium cantilever; the generator works with two magnets in a V arrangement (VM).

The body has threaded inserts, so the cartridge mounts to the headshell with just two screws and no nuts. All VM95 models share the same body: the stylus can be swapped for elliptical, nude elliptical, MicroLinear or Shibata versions.

Audio-Technica specifies 4.0 mV output, 20 Hz to 20 kHz, 18 dB channel separation and a dynamic compliance of 6.5 × 10⁻⁶ cm/dyn. The recommended tracking force is 2.0 g and 47 kΩ at 100–200 pF; the manufacturer quotes a life of around 500 hours for a conical diamond.

What the specialist press says

For this model, the international specialist press evaluated here had not published a review at the time of research. The assessment is based on the manufacturer data.

Who is it for?

For beginners looking for an affordable, robust MM cartridge who later want to upgrade only the stylus.

What makes this AI analysis special

This AI analysis is based on Audio-Technica's product page and user manual; all figures are manufacturer data. As of October 2026.

How the score comes about

The index reflects the very affordable entry with a broad upgrade path and the simple conical tip. The Vinyl BotPro Index on this page remains 43 (Starter, rank 10) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology

Sources

Vinyl BotPro Index: 43 (Starter 40–54) · Label: AI research · Sept 2026