Cartridge · AI analysis · Starter, rank 4

Audio-Technica AT-VM95EN Review

AI analysis (research): nude elliptical on VM95 bodies, 3.5 mV — Specs according to Audio-Technica UK/DE, no listening test.

AI research Starter Index 51 / 100 Price as of Sept 2026
Audio-Technica AT-VM95EN review, cartridge
Photo: manufacturer Audio-Technica · product photo for illustration only.
Audio-Technica AT-VM95EN (2/2) — manufacturer photo
Photo: manufacturer Audio-Technica · additional product photo.

Summary

The AT-VM95EN stays in the same VM95 body but moves to a nude elliptical stylus (lighter and stiffer than the bonded E). Output 3.5 mV, VTF 2.0 g recommended. A sensible intermediate step before the ML/SH — alignment and capacitance remain critical.

Assumptions

  • MM-Phono 47 kΩ · 100–200 pF
  • Clean VTF/anti-skating before Nude style
  • No measurements of our own

Specs (public / manufacturer)

Type / StylusVM Dual-MM · nude elliptical 0.3×0.7 mil
Output3.5 mV (1 kHz, 5 cm/s)
Compliancestatic 20 · dyn. 7×10⁻⁶ cm/dyn @100 Hz
VTF1.8–2.2 g · recommended 2.0 g
Loadnot specified by manufacturer
Weight6.1 g
Replacement stylusAT-VMN95EN
Price guidemarket price approx. €100–140 (without guarantee) · Sept 2026 — check the price date
Manufacturer specifications (Audio-Technica)
Manufacturer data sheet
Typedual moving magnet (VM95 series)
Output voltage3.5 mV (1 kHz, 5 cm/s)
Frequency response20–23,000 Hz
Channel separation22 dB (1 kHz)
Channel balance2.0 dB (1 kHz)
Tracking force1.8–2.2 g (2.0 g standard)
Styluselliptical 0.3 × 0.7 mil, round shank, nude
Cantileveraluminium pipe
Compliancestatic 20 × 10⁻⁶ cm/dyne · dynamic 7 × 10⁻⁶ cm/dyne (100 Hz)
Cartridge weight6.1 g
Replacement stylusAT-VMN95EN

Source: Audio-Technica – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Scores in detail

Technology / build
Nude diamond round shank
7.6
Features
Continue VM95-style family
8.0
Performance (expected)
More RF/Transient reserve than bonded E
7.4
Value for money
Fairer mid-step in the starter/premium margin
7.0
Total (guidance only)
Tier starter
7.3

Vinyl BotPro Index: 51 · Index band Starter 40–54 · Guidance only, not a lab value.

Strengths

  • Nude vs bonded — clear spec step
  • Body compatible with ML/SH later
  • Same mounting logic as VM95E

Weaknesses

  • Lower output (3.5 mV) — Check gain
  • Forgives adjustment errors less than bonded E
  • An AI analysis is not an audition

Comparison models

AT-VM95EBonded entry — cheaper
Ortofon 2M Bluenude elliptical Other Motor — Premium Borderline
Goldring E3Super-elliptic bonded, different concept

System matching

Works well with

  • Cleanly adjusted starter/premium arms
  • Phono with enough MM gain

Less suited

  • First stylus without VTF scale
  • Very high-capacitance setups

Technology in detail

The Audio-Technica AT-VM95EN shares the VM95 body with the E model but moves to a nude elliptical 0.3×0.7 mil stylus (round shank, nude instead of bonded). Manufacturer specifications of the VM95 family (EN-GB/DE): typical output 3.5 mV, VTF 1.8–2.2 g (recommended 2.0 g), compliance within the VM95 range (static often ~20×10⁻⁶ cm/dyn, dynamic ~7×10⁻⁶ cm/dyn @100 Hz), weight 6.1 g, loading 47 kΩ / 100–200 pF, replacement stylus AT-VMN95EN, fitting via M2.6 threaded inserts without nuts. Frequency response and dual-magnet geometry follow the series logic; the specified gain lies in lower tip mass and better tracking compared with the bonded E.

Features: the middle step of the VM95 stylus family — still an elliptical profile, not yet MicroLine/Shibata, but a clear step in physics. Market price typical approx. €100–140 (Sept 2026). Makes sense as a complete purchase or, often more cheaply, as the AT-VMN95EN stylus alone on an existing VM95E body. A later switch to ML/SH remains possible without re-mounting the body.

In the starter comparison the EN sits between bonded E and line contact: pricier and more setup-sensitive than the VM95E, more modular than the 2M Blue (also nude elliptical, different motor, premium borderline) thanks to the ML/SH path, without the MP-110 warm-sound ecosystem but with an upgrade ladder, and nude vs. bonded elliptical against the Goldring E3 at a similar street price. 3.5 mV require gain consciousness.

What the specialist press says

Hi-Fi World (Noel Keywood) compares and evaluates the VM95 series: the EN avoids the 10 kHz break-up of the bonded E, with better inner-groove handling and tracking reserve than the C/E, while the ML/SH extend frequency response and inner-groove performance further. The EN appears there as a strong budget value before the most expensive grinds — the editors’ measurement and listening context, not a VinylCination laboratory.

The audio press describes, in group listening, noticeably more secure tracking in the upper midrange for the nude elliptical compared with the bonded E, in part with a subjectively brighter balance – which can be read either as more information or as a shift in sound. AudioHead's comparisons of the EN, ML and SH highlight the rich sound, presence and dynamics of the EN and put the price jump to the SH down to taste and set-up; several listeners found them close, without the EN automatically "losing".

Forums and follow-up discussions (for example Lenco Heaven) reflect enthusiasm for the value-for-money step, while also recalling Hi-Fi World's findings: the Nude and line-contact styli deliver better technical performance at a similar budget character of the generator. The relative the expectation "EN sounds like high-end M.C.E. VinylCination compiles only as AI summary of the specialist press.

Against the VM95E, the consensus is “a clearer specification step, less excuse for adjustment errors”; against the 2M Blue, the Audio-Technica advantage of the other ML/SH stylus family remains, with a different generator character. Against the Goldring E3 it is nude vs. bonded elliptical — different physics, similar street price. For MP-110 EN replaces modularity with warm tonal balance call.

In short: nude elliptical in the VM95 ecosystem → VM95EN. Cheapest entry onto the same stylus ladder → VM95E. Ortofon nude elliptical → 2M Blue (Premium-borderline). Character without the AT ladder → MP-110. Award all-rounder, bonded elliptical → E3.

Who is it for?

Compliance / tonearm

Same body mass 6.1 g and dyn. Compliance logic @100 Hz like VM95E — medium arms. Nude forgives crooked azimuth/VTA layers less; the arm should allow overhang, azimuth and anti-skating seriously. Glued-in OEM stylus without counterweight is the wrong host. Threaded inserts remain mounting advantage.

VTF

Recommended 2.0 g (1.8–2.2 g). Before buying: digital scale and quiet placement. EN is not a "first stylus without a tool" product. After changing from the bonded E to the EN, reset VTF and bias, even though the body stays the same.

Phono loading

47 kΩ / 100–200 pF. 3.5 mV calls for slightly more MM gain reserve than 4.0/5.5 mV systems. Check weak phono stages and very short gain paths. Keep the capacitance window tight. If the sound turns shrill after a stylus change, check load and geometry first; do not buy the ML straight away. Guidance: a solid MM phono stage in the Starter/Premium budget, no listening claim.

Budget / upgrade

Market price ~100–140 €: compare directly with “buy the VM95E + only an EN stylus later” — often cheaper and lower-risk. Then ML/SH without body changes. The 2M Blue only in parallel, if you prefer Ortofon and are willing to give up the Audio-Technica stylus family. Absolute Index 51 reflects the middle step: better specification than the bonded E, but value for money behind the VM95E champion.

Practical buying tip: if you already own a VM95E, the AT-VMN95EN stylus is usually cheaper and less risky than a complete EN cartridge. The geometry stays, only tip mass and tracking ability change. If you are starting out now and plan to move to the ML or SH later, you can treat the EN as a deliberate intermediate step or budget directly for the ML; Hi-Fi World and AudioHead suggest that the biggest jump is often from bonded to nude/line-contact, while SH versus EN remains a matter of taste and set-up. VinylCination recommends an audition, or at least a clear readiness to align — not an impulse purchase because of the “Nude” label.

System Note: 3.5 mV of weak MM inputs can be quieter than 2M Red or VM95E; this is not a defect, but specs. If you confuse volume with gain and overload the phono stage, you create distortion that is wrongly blamed on the nude stylus. In short: level, load and geometry before profile myths.

The special features of this analysis

This AI analysis brings together manufacturer specifications, technical data and the verdicts of the specialist press in a compact assessment. It shows where the sources agree, which strengths come up again and again, and which system the product suits best. Prices as of Sept 2026.

How the score comes about

Vinyl BotPro Index 0–100; Starter ~40–54. AT-VM95EN: 51 (rank 4): higher engineering and performance expectation than the bonded E, strong features (stylus family remains), value for money behind the VM95E owing to its market price. Weights ~25/20/25/30. No listening test. Details: Details on weighting · Methodology.

Sources

Created by Vinyl BotPro (AI) · As of Sept 2026 · Corrections: info@vinylcination.de