Active floorstanding speaker · AI analysis · Starter, Rank 1
Canton Smart GLE 9 S2: Analysis
AI analysis (Research): Active 3-way stand-up speaker pair of Canton with 25-mm aluminium-manganese tweeter, 174-mm titanium midrange driver, two titanium low toners, 350 W per box, RCA, XLR, Koax, optical and USB input, Bluetooth aptX and radio between the speakers. Based on manufacturer data, no listening test.

Summary
This model no longer holds a Vinyl BotPro Champion title. A champion title requires at least one international independent listening test; none was found for this model.
The Canton Smart GLE 9 S2 transmits Canton's GLE floorstanding speaker into the Smart active series: 3-way Construction with 25-mm tweeter made of aluminium manganese, 174-mm midrange driver and two bass drivers with titanium membrane and wave-sick. Each box has its own amplifier with 350 W; Canton calls a frequency range from 24 to 30,000 Hz. The speakers pair with 5 GHz radio with 24 bit/96 kHz, by default only the main speaker needs signal cables (with XLR, both speakers according to the manual). Inputs are RCA, XLR (symmetric), coaxial and optical (each 24/96), USB with XMOS interface (24/96) and Bluetooth with aptX; a subwoofer output is available. There's no phono input. Canton lists 1,900 € per pair (as of Oct. 2026, without guarantee).
Assumptions
- Price per pair or set according to manufacturer or trade, Stand Oct. 2026, no guarantee
- Vinyl via an external phono stage at RCA or XLR (the speaker has no phono input) or via a turntable with a built-in preamp
- Free placement with distance to the rear wall, decoupled Turntable
- No in-house measurements or listening tests
Specifications (manufacturer)
| Type | Active 3-way floorstanding speaker · Bass reflex (backfire) |
|---|---|
| Chassis | 25 mm Aluminium-manganese tweeter · 174 mm Titanium-Midrange driver · 2 Titanium Woofer (Wave-Sicke) |
| Amplifier | 350 W per speaker |
| Frequency range | 24 – 30,000 Hz (manufacturer) |
| Inputs | RCA · XLR (symmetric) · Coaxial (24/96) · Optical (24/96) · USB type B with XMOS (24/96) · Bluetooth aptX |
| Outputs | Subwoofer (RCA, mono) |
| Loudspeaker connection | Radio 5 GHz, 24 bit/96 kHz (stereo) |
| Phono | No phono input — external phono stage at RCA or XLR |
| Dimensions / weight | 21 × 106.3 × 30 cm (B × H × T, with feet) · 19.4 kg per speaker |
| Price guide | MSRP 1,900 €/pair (Canton) · as of Oct. 2026 · without guarantee |
Manufacturer specifications (Canton)
| Type | Active three-way floorstanding speaker · bass reflex (rear) |
|---|---|
| Amplifier power | system power 350 W per speaker · load impedance not specified by manufacturer (built-in amplifier) |
| Drivers | 25 mm aluminium-manganese tweeter · 174 mm titanium midrange · 2 × 192 mm titanium woofers (wave surround) |
| Frequency response | 24–30,000 Hz |
| Crossover frequency | 3,000 Hz |
| Inputs | RCA analogue · XLR · coaxial · optical (each 24-bit/96 kHz) · USB (XMOS) · Bluetooth aptX |
| Dimensions | 210 × 1,063 × 300 mm (W × H incl. feet × D) |
| Weight | 19.4 kg |
| Power consumption | standby 0.35 W (ECO) |
Source: Canton – official specifications · As of 16 October 2026 · subject to change by the manufacturer
Rating criteria in detail
The four criteria feed into the Vinyl BotPro Index with weights of 25/20/25/30. The index is scaled across all tiers (see Methodology); that is why we do not show individual sub-scores.
Strengths
- 350 W per box and 24 Hz according to manufacturer
- XLR input for symmetrical phono stages
- USB-DAC, coaxial, optical, Bluetooth aptX
- Radio connection between the speakers
Weaknesses
- No phono input
- No WLAN streaming directly in the box
- Bluetooth only in version 3.0
- Bass reflex back needs distance from the wall
Comparison models
| Teufel Ultima 40 Aktiv 3 | Index 52, Rank 2, value for money Champion — Status · 3-way · Bass-reflex · approx. €800 |
|---|---|
| Teufel Stereo L 2 | Index 41, Rank 3 — Balance · 3-way · Koax · approx. €1,500–2,000 |
System matching
Works well with
- Listeners with external phono stage, often symmetrical
- Average living space
- Music and TV without separate amplifier
Less suited
- Turntable without phono stage
- If you want WLAN streaming directly in the box
- Very close-to-wall placement
Specs & Features
The layout (two active speakers, master–slave), drivers, connections and conflicting figures are now collected, with sources, in the analysis below.
Research Consensus
We evaluate the articles by AUDIO+stereoplay (assessed 02/2025) and AREA DVD (05/2022) separately and with dates below.
For whom / Matching
Amplifier & Phono stage
There's no need for an amplifier. A phono stage from Top list Phono preamps comes to RCA or, if symmetrical, to XLR.
Turntable & phono
Matching decks are in the Starter and Premium stage. At 24 Hz bass extension, a subsonic filter is useful in the phono stage.
Room & placement
Medium living space, distance to the back wall because of the Backfire port. The radio connection facilitates the placement on both sides of the TV.
Budget & upgrade
At €1,900 per pair, the model sits at rank 1 of the Starter tier. With Downfire bass and 600 W per box, the Canton Smart Vento 9 S2 continues.
Analysis: the Canton Smart GLE 9 S2 in depth
What this page is: an AI analysis, not a listening session
This page brings together what can be documented about the Canton Smart GLE 9 S2 from manufacturer documents and two dated articles from the specialist press. The basis is Canton's product page with technical data [1], Canton's user manual for Smart floorstanding and compact speakers [2], Canton's quick-start guide for Smart speakers [3], a review by the editors of AUDIO+stereoplay published online at connect.de [4], and an overview article by AREA DVD on Canton's Smart range [5]. A Dutch-language review from hifi.be [6] is used only to place the passive sister series. Vinyl BotPro has neither heard nor measured these speakers. Statements about sound and measurements are reported as statements by the named publications. Our own assessments are labelled as such. The page's rank, index and price details remain unchanged.
Which model this is
- Smart GLE 9 S2: the active floorstanding pair analysed here. According to the scope of delivery, Canton ships it as "Smart GLE 9 S2 (Main)" and "Smart GLE 9 S2 (Secondary)" [1].
- Smart GLE 9 (first generation, "S1"): the predecessor. According to AUDIO+stereoplay it used silver aluminium cones, whereas the S2 uses ochre-coloured titanium cones [4]. The articles from 2019 to 2021 linked in the awards area of Canton's page carry the name "Smart GLE 9" without "S2" [1]. We therefore do not use them for the S2.
- Smart GLE 9 5.1 Set and streaming sets: Canton also sells the S2 in sets with a centre, rear speakers, subwoofer or streamer [1]. AUDIO+stereoplay reviewed such a 5.1 set; below we keep statements about the set apart from statements about the floorstander [4].
- GLE 90 (passive): the passive floorstander of the GLE series. hifi.be describes the Smart GLE 9 S2 as the active variant of this line, but listened to the passive models with AV electronics [6]. We do not transfer those listening impressions.
Architecture: two active speakers with master–slave control
Unlike active sets with a passive second speaker, every cabinet of the Smart GLE 9 S2 has its own power amplifier. Canton quotes 350 W system power "per speaker" [1]; AREA DVD speaks of a "350-watt power amplifier per box" [5]. According to the quick-start guide, each speaker is connected to the mains with its own power cable [3]. Canton's product page, however, lists just "power cable" in the scope of delivery without a quantity, while the older user manual lists "2x power cable" [1][2].
The roles still differ. The Smart range works on the master–slave principle: sources connect primarily to the master, and the slave is controlled by radio and fed the audio signal by radio [2][3]. From the factory the master is set up as the left speaker and the slave as the right one; the side assignment can be changed [3]. According to the manual, Dolby and DTS bitstreams are decoded only in the master [2]. The manual also says the USB input can only be used on the master [2].
Canton calls the wireless link "Cantonet": 5 GHz, two audio channels at 24 bit/96 kHz or three to eight audio channels at 16 bit/48 kHz [1]. Alternatively, the signal can travel from master to slave over a coaxial digital cable; for this the SLC setting in the system menu has to be switched from WLS to WRD [2][3]. According to the manual this only works in stereo operation or between the two front speakers of a multichannel setup [2].
When both speakers need a signal cable
One exception matters in practice: the analogue inputs do not always run through the master.
- XLR (balanced): According to the manual, an XLR cable always carries only one channel. The source therefore has to be connected directly to both speakers: left output to the left speaker, right output to the right speaker. The manual states explicitly that connecting only the master is not enough [2].
- RCA ("Analog Line"): By default both channels go into the master and are distributed by radio (setting ASM = SST). With ASM = DST, the source is connected directly to each speaker [2].
- Play modes: With XLR, and with RCA connected directly to both speakers, only the stereo mode "ST" is available according to the manual [2].
Our assessment: anyone who wants to connect a phono stage with balanced outputs to the XLR inputs has to run one XLR cable to each speaker. With a phono stage on RCA in the default mode, one cable to the master is enough.
Technology according to Canton
- Principle: 3-way, bass reflex; the port direction is given as "Backfire", i.e. to the rear [1].
- Tweeter: 1 × 25 mm, aluminium-manganese [1]. According to the product text it has a "transmission front plate" [1].
- Midrange: 1 × 174 mm, titanium, Wave surround [1].
- Woofers: 2 × 192 mm, titanium, Wave surround [1].
- Frequency range: 24 to 30,000 Hz; in the running text Canton mentions bass "down to 25 hertz" [1].
- Crossover frequency: 3,000 Hz. For a 3-way system Canton quotes only this single value [1].
- Power: 350 W system power per speaker [1].
- Dimensions and weight: 21 cm wide, 106.3 cm high including feet, 30 cm deep (31 cm with the grille), 19.4 kg [1].
- Cabinet: vinyl-foil cabinets in black or white, lacquered baffles, magnetically attached fabric grilles, four integrated feet [1].
- Standby: 0.35 W in ECO and AUT modes, 1.2 W in network standby [1].
Connections and functions
According to Canton the speaker has one RCA analogue input, one XLR input, one coaxial and one optical digital input (each 24 bit/96 kHz), a USB 2.0 type B input with XMOS (PCM 24 bit/96 kHz) and Bluetooth 3.0 with aptX and SBC [1]. There is also a coaxial digital output and a subwoofer output (RCA, mono); for the latter, Canton's table additionally says "No", so this entry is ambiguous [1]. Canton does not list a phono input. Canton does not list Wi-Fi streaming for the speaker itself; instead, the product page points to the separate Smart Connect 5.1 streamer [1].
Via S/PDIF, the speaker processes Dolby Audio, DTS Digital Surround and PCM up to 24 bit/96 kHz according to Canton, plus the DTS TruSurround virtualiser [1]. Features include an equaliser for room adaptation, bass management, dynamic range control, lip sync, listening distance and level per speaker, an IR learning function and an adjustable maximum volume [1]. According to the manual, bass, midrange and treble can each be adjusted by ±6 dB [2].
Placement according to Canton
For room adaptation, the EQ menu offers three presets [2]:
- EQ1: free-standing placement (factory setting).
- EQ2: placement against a rear or side wall.
- EQ3: placement in a room corner.
We did not find distance figures in centimetres in the Canton documents we evaluated. The manual gives general advice such as keeping distance from heat sources [2]. Canton calls the rear-facing port "Backfire" [1].
AUDIO+stereoplay (connect.de, 2025/2026)
The article by Frédérick Heinz covers a Smart GLE 5.1 set with the GLE 9 S2, GLE 3 S2, the GLE 5 S2 centre and the Smart Sub 12 subwoofer [4]. The online seals date the editorial assessment by AUDIO+stereoplay to February 2025; the online version is dated 6 August 2026 [4].
- Technical update: The editors call it a "solid update". The new titanium cone material required a revision of the driver from motor to voice coil and a new filter tuning [4].
- Unchanged: The Wave surround and the aluminium-manganese tweeter dome remained; the front grille is new, oval and magnetic [4].
- The editors' measurements: For the GLE 9 S2 they give 34 Hz (−6 dB) as the lower cut-off, compared with 35 Hz for the predecessor, and a maximum level of 104 dB SPL [4]. The frequency responses are described as straight both on-axis and off-axis [4].
- Sound according to the editors: more neutral and lower in distortion than the predecessor; the slight emphasis in the upper treble of the older models has gone [4]. In stereo the GLE 9 S2 does not need a subwoofer [4].
- Placement within the set: Because of the set's strong bass output, the GLE 9 S2 was run with EQ preset 2; depending on the room, EQ preset 3 may be needed [4].
- The editors' conclusion: dynamic and neutral with a slight bass emphasis [4].
Limitation: the online seals refer to the "Canton Smart GLE 9 5.1 Set" (168 points, value for money "very good"), not to the floorstander alone [4]. The online version gives no individual score for the GLE 9 S2.
AREA DVD (May 2022)
In an XXL special dated 3 May 2022, Carsten Rampacher presents Canton's Smart range [5]. On the Smart GLE 9 S2 he writes that it was adapted to the new passive GLE generation. He gives a set price of EUR 1,760 at the time (as of 3 May 2022) [5]. Features and power amplifiers match the more expensive Smart models. The difference shows in the cabinet finish: foil wrap, visible screws on the baffle, an overall plainer look [5].
The article is a range overview. It contains no detailed listening section on the GLE 9 S2; we use it only for features, finish and the dated price.
Conflicting figures
- Lower limit: Canton table 24 Hz, Canton running text 25 Hz, AREA DVD 25 Hz, AUDIO+stereoplay measured 34 Hz at −6 dB [1][4][5]. These values use different reference points and are not directly comparable.
- Weight: Canton 19.4 kg, AREA DVD 19.2 kg [1][5].
- Subwoofer output: Canton lists an RCA output but writes "/No" on the same line [1].
- Crossover frequencies: only 3,000 Hz is given, although the design is 3-way [1].
- Manual: According to its file name, the linked user manual dates from 17 December 2019 and applies to Smart floorstanding and compact speakers in general [2]. It does not explicitly confirm that every detail applies to the S2.
- hifi.be: names aluminium-magnesium tweeters for the GLE line; Canton names aluminium-manganese [1][6].
Where the sources agree
The manufacturer, AREA DVD and AUDIO+stereoplay agree on 3-way, bass reflex, a 25 mm aluminium-manganese tweeter, a 174 mm titanium midrange and two 192 mm titanium woofers [1][4][5]. AREA DVD and the data table at connect.de confirm 350 W per speaker [4][5]. AREA DVD notes compromises in cabinet finish [5]. The online version at connect.de does not explicitly mention the cabinet surface; we find such a criticism of the print edition only in second-hand quotes and do not use it. AUDIO+stereoplay and hifi.be agree that the S2 is derived from the revised passive GLE line [4][6].
In a vinyl system
The Smart GLE 9 S2 replaces the amplifier and the speakers, but not a phono stage [1]. A turntable without a built-in preamp needs an external phono stage. It can go to RCA (one cable to the master in the default mode) or, if it has balanced outputs, to XLR (one cable to each speaker) [2]. A deck with a built-in preamp can connect directly to RCA.
Our assessment: analogue signals are processed digitally inside the speaker, because EQ, bass management and the wireless link run through the electronics [1][2]. The documents do not show whether a purely analogue signal path exists. The sources we evaluated say nothing about the sound with a turntable.
Home cinema and expansion
Via its optical and coaxial inputs, the pair decodes Dolby and DTS audio itself [1]. Canton offers the S2 in sets up to 5.1; Canton gives 5.1 as the maximum output configuration [1]. For multichannel use, AUDIO+stereoplay recommends the Smart Sub 12 as an addition and names the Smart Connect 5.1 as a suitable partner [4]. According to the same editors, listeners using stereo without a subwoofer can do without it [4].
Who the sources point to
- Listeners who want a large floorstanding pair with a TV connection and no separate amplifier [1][5].
- Users who need XLR, USB audio and a Dolby/DTS decoder in one device [1].
- Rooms where placement near a wall or in a corner is unavoidable, since Canton provides dedicated EQ presets for this [2].
Less suitable according to the sources: anyone who wants Wi-Fi streaming built into the speaker [1], anyone who values an elaborate cabinet finish [5], or anyone expecting a phono input [1].
Open points and limits of this analysis
- No listening session of our own and no measurements of our own. All measured values come from AUDIO+stereoplay [4].
- For the S2 we have only one review with a listening and measurement section, and it is in the context of a set [4].
- We do not transfer older articles on the first-generation Smart GLE 9.
- The user manual dates from 2019 and covers the whole range; S2-specific differences are possible [2].
- Prices change; EUR 1,760 is a historical set price (as of 3 May 2022) [5].
- A human fact-check and a browser check of this page are still pending.
Sources for this analysis
- Canton: Smart GLE 9 S2 (Produktseite mit technischen Daten und Lieferumfang, abgerufen/accessed 08.11.2026). https://www.canton.de/produkte/typ/standlautsprecher/smart-gle-9-s2/04242
- Canton: Bedienungsanleitung Smart Stand-/Kompaktlautsprecher (PDF, Dateistand 17.12.2019 / user manual, file dated 17.12.2019). https://www.canton.de/media/97/9f/7e/1680003617/_default_upload_bucket_180385_Manual_Canton_Smart_Stand-Kompaktlautsprecher_Final_17-12-19_1.pdf.pdf
- Canton: Kurzanleitung Smart Lautsprecher (PDF / quick-start guide). https://www.canton.de/media/53/e6/1a/1680006306/_default_upload_bucket_Kurzanleitung_Smart_220321_web_4.pdf.pdf
- connect.de / AUDIO+stereoplay: Canton Smart GLE 9 5.1 Set (Frédérick Heinz, Prüfung 02/2025, online 06.08.2026). https://www.connect.de/testbericht/canton-smart-gle-9-5-1-set-test-flexibel-kraftvoll-smart-ueberzeugend-stereo-surround-hifi-3208333.html
- AREA DVD: XXL-Special Cantons Smart-Serie (Carsten Rampacher, 03.05.2022). https://www.areadvd.de/tests/xxl-special-cantons-smart-serie-aktive-lautsprecher-av-komponenten-soundbars-sounddecks-sowie-aktive-subwoofer/
- hifi.be: Canton GLE serie luidsprekers en Power Sub 12 (Ronald de Boer, 25.11.2023). https://hifi.be/artikel/32951/Review-Canton-GLE-serie-luidsprekers-en-Power-Sub-12.html
Created by AI (Vinyl BotPro) from the sources listed; no listening tests or measurements of our own. Detailed human fact-check pending.
What makes this AI analysis special
This section is an AI summary from Manufacturer data. Vinyl BotPro had no physical access, no measurement of our own chain and no listening test. The basis is Canton's manufacturer documents plus dated articles by AUDIO+stereoplay (connect.de) and AREA DVD; differing figures are marked below. Prices and availability change (as of Oct. 2026, no guarantee); please check technical values against the current data sheet.
Vinyl BotPro Score Logic
The Vinyl BotPro Index is multi-level 0–100 and weighted Technology/Build, features, expected performance and value for money with 25/20/25/30. Starter is typically ~40–54. Canton Smart GLE 9 S2 receives 53 (Rank 1 starter). Highest expected performance of the starter stage according to concept and data; value for money solid. Rank is not Laboratory Evaluation — no Listening test. Details on weighting · Methodology.
Sources
Created by Vinyl BotPro (AI) · AI analysis · As of 08.10.2026 · Corrections: info@vinylcination.de · Prices without guarantee.
Read more: best active floorstanding speakers 2026 · What is hi-fi?