Phono preamp · AI analysis · Expert, rank 11

Clearaudio Smart Phono V2 Review

AI analysis (research): a compact MM/MC phono stage with a gain wheel and switchable loading, hand-assembled in Erlangen; based on manufacturer data and the international specialist press.

AI research Expert AI analysis Index 72 Prices as of Sept. 2026
Clearaudio Smart Phono V2 review, phono preamp
Photo: manufacturer Clearaudio · product photo for illustration only.

Summary

The Smart Phono V2 (approx. €620–800) amplifies MM by 34 dB and MC by 54 dB, plus a gain control (range not specified by the manufacturer). MC loading can be switched from 50 Ω to 5 kΩ, and a subsonic filter sits on the underside. Clearaudio carries out the SMD assembly in Erlangen.

Specs (public / manufacturer)

TypeMM/MC phono stage · Aluminium
Gain34 dB MM · 54 dB MC (1 kHz) · Gain control
MC load50 / 100 / 500 Ω · 1 / 5 kΩ · 150 / 250 / 400 pF
MM load47 kΩ · 150 / 250 / 400 pF
RIAA±0.3 dB from 10 Hz to 100 kHz
Distortion / signal-to-noise<0.004 % · 85 dB(A) MM · 72 dB(A) MC
Outputmax. 10 V RMS · 75 Ω · optional 3.5 mm headphone
FilterSubsonic via jumper
Power supply±18 V DC / 300 mA external
Dimensions / weightApprox. 95 × 125 × 34 mm · approx. 620 g incl. power supply
Price guideapprox. €620–800 · Sept 2026
Manufacturer specifications (Clearaudio)
Manufacturer data sheet
TypeMM/MC phono preamp · MM/MC and subsonic filter via jumper (underside)
Gain factor34 dB (MM) · 54 dB (MC), 1 kHz
Input impedance/capacitanceMC 50 / 100 / 500 Ω, 1 / 5 kΩ · MM 47 kΩ · each 150 / 250 / 400 pF
RIAA accuracy± 0.3 dB (10 Hz–100 kHz)
Distortion< 0.004 % MC (A, 1 kHz, −1 dB @ MAX)
Signal-to-noise ratio85 dB(A) MM · 72 dB(A) MC
Overload margin18 dB (MC, gain control at MAX)
Max. output voltage10 V RMS (1 kHz)
Channel separation> 90 dB (1 kHz)
Output impedance75 Ω
Connectionsinput RCA · output RCA · optional 3.5 mm headphone jack (headphone version)
Power supply± 18 V DC / 300 mA (external plug-in supply)
Power consumptionmax. 2.7 W
Weightapprox. 620 g (incl. power supply)
Dimensionsapprox. 95 × 125 × 34 mm (W × D × H)

Source: Clearaudio – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • A good match: MM and MC cartridges with adjustable loading
  • A good match: low-output MC cartridges via the gain wheel
  • A good match: the optional headphone output
  • Less suitable: balanced MC wiring
  • Less suitable: anyone who wants to run the stage without an external power supply

Technology in detail

Clearaudio specifies two separate SMD circuits for the Smart Phono V2: 34 dB for MM and 54 dB for MC, both at 1 kHz. There is also a gain control; Clearaudio does not state its range.

The load is set via jumpers on the underside. MC offers 50, 100, 500 Ω as well as 1 and 5 kΩ at 150, 250 or 400 pF; MM stays at 47 kΩ with the same capacitances. A further jumper switches the subsonic filter.

RIAA accuracy is ±0.3 dB from 10 Hz to 100 kHz, distortion below 0.004 % and signal-to-noise ratio 85 dB(A) for MM and 72 dB(A) for MC. The output delivers up to 10 V RMS into 75 Ω. The external power supply delivers ±18 V at 300 mA; with the power supply the unit weighs around 620 g. A headphone version with a 3.5 mm socket is available as an option.

What the specialist press says

For this model, the international specialist press evaluated here had not published a review at the time of research. The assessment is based on the manufacturer data.

Who is it for?

For anyone who wants to fine-tune MM and MC and is looking for a compact stage from Erlangen with a headphone option.

What makes this AI analysis special

This AI analysis is based on Clearaudio's technical data and manual; all figures are manufacturer specifications. As of October 2026.

How the score comes about

The index sits in the Expert band: adjustable MC loading, a very linear RIAA curve and manufacturing in Erlangen support the rating. The Vinyl BotPro Index on this page remains 72 (Expert, rank 11) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology

Sources

Vinyl BotPro Index: 72 (Expert 70–84) · Label: AI research · Sept 2026