Cartridge · AI analysis · Expert, rank 9

Dynavector 10X5 MkII Review

AI analysis (research): High-output MC with Flux Damper and line-contact stylus for standard MM inputs; based on manufacturer data.

AI research Expert AI analysis Index 76 Prices as of Sept. 2026

Summary

The 10X5 MkII (approx. €650–700) is a high-output MC with 2.8 mV, so it plays directly into an MM input. The nude Shibata III stylus sits on a hardened aluminium pipe just 6 mm long. Flux Damper and "Softened Magnetism" are meant to keep the magnetic field stable.

Specs (public / manufacturer)

Type / StylusHigh-output MC · Nude Shibata III (line contact) · Hardened aluminium pipe cantilever, 6 mm
Output2.8 mV (1 kHz, 5 cm/s)
Frequency response20 Hz–20 kHz (±2 dB)
Channel separation / balance25 dB · 1.0 dB (1 kHz)
Compliance12 mm/N
Tracking force1.8–2.2 g
Impedance / load150 Ω · Load >1 kΩ (MM input)
Weight7.5 g
Price guideapprox. €650–700 · Sept 2026
Manufacturer specifications (Dynavector)
Manufacturer data sheet
Type / StylusHigh-output MC · Nude Shibata III (line contact) · Hardened aluminium pipe cantilever, 6 mm
Output2.8 mV (1 kHz, 5 cm/s)
Frequency response20 Hz–20 kHz (±2 dB)
Channel separation / balance25 dB · 1.0 dB (1 kHz)
Compliance12 mm/N
Tracking force1.8–2.2 g
Impedance / load150 Ω · Load >1 kΩ (MM input)
Weight7.5 g

Source: Dynavector – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Good fit: MM phono stages (47 kΩ)
  • Good fit: Medium-mass tonearms
  • Good fit: Upgrading from a good MM cartridge
  • Less suited: Anyone who wants to replace the stylus themselves (MC design)
  • Less suited: Very light tonearms

Technology in detail

Dynavector has built the 10X series since 1978; the red body is its trademark. The 10X5 arrived in 2003 with a powerful neodymium magnet and aluminium head block; the MkII brings an improved stylus assembly with a nude Shibata III diamond and hardened cantilever.

The patented Flux Damper on the front yoke is meant to reduce fluctuations in magnetic flux caused by the movement of the armature. According to Dynavector, "Softened Magnetism" stabilises the magnetic field in the air gap so that loud, large excursions sound less harsh.

With 2.8 mV output, the 10X5 MkII needs no step-up transformer and no MC head amp; a load above 1 kΩ is recommended. Dynavector specifies 20 Hz to 20 kHz, 25 dB channel separation, 12 mm/N compliance and 1.8–2.2 g tracking force. For MC phono stages there is also the 10X5 MkII LOW version.

What the specialist press says

For this model, the international specialist press evaluated here had not published a review at the time of research. The assessment is based on the manufacturer data.

Who is it for?

For vinyl listeners with an MM phono stage looking for MC sound and a line-contact stylus without an additional step-up transformer.

What makes this AI analysis special

This AI analysis is based on Dynavector's product page and data sheet; all figures are manufacturer data. As of October 2026.

How the score comes about

The index reflects the high-output MC design with line-contact stylus and the easy connection to any MM input. The Vinyl BotPro Index on this page remains 76 (Expert, rank 9) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology

Sources

Vinyl BotPro Index: 76 (Expert 70–84) · Label: AI research · Sept 2026