In-ear analysis · Expert · as listed
Etymotic ER4SR Analysis
The Etymotic ER4SR sits on the in-ear shortlist of 12 November 2026 in the Expert tier, now expanded to seventeen models, in rank 13 with a Vinyl BotPro index of 71 and no tier badge. This analysis takes the list record as published and does not run a second calculation.
In brief
The Etymotic ER4SR is a wired universal in-ear with a single balanced-armature driver in the ER4 line, here in the studio-reference ER4SR tuning, not the bassier XR version ER4XR. The official EU shop Westone Audio lists 45 Ω, 98 dB at 1 mW, 20 Hz–16 kHz, MMCX and a 120 cm cable. For the sibling ER4XR the same shop lists 152 cm; this page takes the 120 cm length stated on the ER4SR product page and discloses the difference. On the in-ear shortlist of 12 November 2026 it sits in the Expert tier, now expanded to seventeen models, in rank 13 with a Vinyl BotPro index of 71 and no tier badge. It shares index 71 with the Etymotic ER4XR, the Westone MACH 20 and the Final A5000; at the same index and the same sound-evidence score of 7.4 as the ER4XR, the same documented euro price leaves the alphabetical name to decide, so the ER4SR ranks ahead of the ER4XR, and the MACH 20 and A5000 follow with lower sound-evidence scores. The subscores and the linear mapping onto the 70–84 band are documented in the list package; this page repeats the list record and does not run a second calculation.
The listening report comes from SoundGuys (Adam Molina, 27 January 2017, page showing a 16 March 2022 update) and Major HiFi (Steph Durwin, 8 January 2018, updated 20 October 2019): a dated listening review of the exact model in an independent international online specialist outlet of the same class already used for other in-ears on this list. SoundGuys covers the exact ER4SR model. Major HiFi is an ER3SE-versus-ER4SR comparison with its own sections on the ER4SR. Combined scores are not taken as an SR-only mark. Under the single badge rule of 12 November 2026 — including addendum t647s3962 — the Etymotic ER4SR is eligible; its pillar here is the written review. The documented euro price is €379.99 at Westone Audio EU (InStock / “Ordered before 16:00, shipped today”, retrieved 12 November 2026). The Sound badge in the tier remains with the Campfire Audio Iris, and the value badge with the Moondrop Blessing 3.
Technical data (published)
| Design | Wired universal in-ear, single balanced-armature driver (Westone Audio EU) |
|---|---|
| Impedance | 45 Ω (Westone Audio EU) |
| Sensitivity | 98 dB at 1 mW (Westone Audio EU) |
| Frequency response | 20 Hz–16 kHz (Westone Audio EU). SoundGuys notes that the treble drops off audibly around 16–17 kHz, matching the official figure, which does not extend to 20 kHz. |
| Connection | MMCX, 120 cm cable (Westone Audio EU). For the ER4XR the same shop lists 152 cm; the length stated on the ER4SR page is used, and the difference is disclosed. |
| Isolation | As usual in the ER line, related texts cite 35–42 dB with deep insertion; Major HiFi confirms impressive isolation. That remains a figure from the pillars, not an in-house measurement. |
| Price | €379.99 at Westone Audio EU, InStock, 12 November 2026 |
Amplifier compatibility
Westone Audio lists 45 Ω and 98 dB at 1 mW, the same electrical figures as the ER4XR. That sits above typical low-impedance universal in-ears and explains why the drive subscore of 7.4 matches the ER4XR: it needs more voltage for ordinary levels than the ER3 series at 22 Ω.
Major HiFi hears the ER3SE as louder overall than the ER4SR, in line with the official 102 dB against 98 dB. SoundGuys does not describe the model as unusable day to day, but stresses the near-reference character, not undemanding loudness on every output.
On a vinyl system with a typical headphone output, the main question is whether 45 Ω finds enough level and damping. A low-noise, voltage-capable output is more useful than a large surplus of power.
The drive subscore of 7.4 stays below the 8.4 of the ER3 models in Premium and matches the ER4XR. It does not claim an easier picture than the impedance supports.
Scoring criteria in detail
The Vinyl BotPro index on this page is not a second calculation, but the list record of 12 November 2026. The Expert tier now holds seventeen models; the mapping uses the 70–84 band linearly across the unrounded raw score. With a raw score of 7.44 the Etymotic ER4SR sits at index 71 and rank 11. It shares index 71 with the Etymotic ER4XR, the Westone MACH 20 and the Final A5000; at the same index and the same sound-evidence score of 7.4 as the ER4XR, the same documented euro price leaves the alphabetical name to decide, so the ER4SR ranks ahead of the ER4XR, and the MACH 20 and A5000 follow with lower sound-evidence scores. Shared indices are allowed; rank remains unique. The mapping follows the decision of 12 November 2026: the unrounded raw score is placed linearly on the tier band, strongest model at the ceiling, weakest at the floor, with no required gap between places. Shared indices within a tier are allowed; rank remains unique (higher index first, then higher sound-evidence score, then lower documented euro price, then alphabetical name).
The subscores are sound 7.4, build 7.6, drive 7.4 and value 7.4. The sound-evidence score matches the ER4XR (7.4), sits above the MACH 20 (7.2) and the A5000 (7.0) on the shared index 71, and stays below Iris (7.6); it does not take the value badge, which remains with Blessing 3 at 8.2. The build score of 7.6 follows the metal shell, the shielded cable and the richer kit Major HiFi describes relative to the ER3SE, with the familiar limit of deep insertion. The drive subscore of 7.4 reflects 45 Ω and 98 dB at 1 mW. The value score of 7.4 follows €379.99 and matches the ER4XR, without taking the tier’s value badge (Blessing 3, 8.2).
The manufacturer and the concept
The ER4SR is the studio reference of the renewed ER4 line: a deliberately flat, little-embellished tuning against the ER4XR with raised low bass. SoundGuys calls the model “flat as hell, in a good way” and his new favourite in-ear when accuracy matters.
Major HiFi compares exactly this studio version with the less expensive ER3SE. The text therefore covers the exact ER4SR, even though the article is a comparison.
Westone Audio is the official EU channel. The figures 45 Ω, 98 dB at 1 mW, 20 Hz–16 kHz, MMCX and 120 cm come from the ER4SR product page. The length difference from the ER4XR (152 cm in the same shop) is disclosed, not ignored.
The technology, explained
A single balanced-armature driver has to cover the stated 20 Hz–16 kHz range on its own. SoundGuys hears kick transients that lack typical thump, a midrange that stays almost flat with a slight lift for vocals, and treble that drops off audibly around 16–17 kHz: cymbals and hi-hats detailed, never harsh, especially convincing on jazz with fine brushwork.
Major HiFi hears the same modest, flat low end as on the ER3SE, but tighter and with a more detailed dynamic response. In the midrange a lift around 2 kHz separates vocals more clearly from instruments; the ER4 has no dip around 5 kHz and therefore clearer consonants. In the treble it reaches farther and responds more dynamically than the ER3SE; the stage is more accurate in depth.
45 Ω and 98 dB at 1 mW make the model more demanding than the ER3 series. The shielded, individually run cable and the richer kit with a hard case, more tips and a 6.35 mm adapter are, according to Major HiFi, what set the ER4SR apart outwardly from the ER3SE.
Deep insertion and high isolation remain the design centre. That feeds the build subscore and is the familiar price of the drawing.
What the international specialist press hears
SoundGuys — Etymotic ER4SR review (Adam Molina, 27 January 2017)
Molina calls the model flat in a good way and his new favourite in-ear if one wants to hear music with little embellishment. He can hardly recommend it to anyone not looking for accuracy. The bass has little typical thump, the midrange stays almost flat with a slight lift for vocals, and the treble drops off audibly around 16–17 kHz while staying detailed without becoming harsh; he particularly highlights jazz with brushwork.
On bass-heavy music the model will let listeners down; for production and mixing, or out of curiosity about unvarnished recordings, the accuracy is the point. He knows that a flat tuning is a minority taste and therefore finds the model hard to recommend to typical entertainment listeners. The site’s editorial overall mark is not carried into the Vinyl BotPro index.
Major HiFi — Etymotic ER3SE vs Etymotic ER4SR (Steph Durwin, 8 January 2018)
Durwin hears the ER4SR in direct comparison as the more detailed, dynamically finer studio model. The low end is similarly flat but tighter, and kick and bass transients have more separation. In the midrange the absence of a 5 kHz dip and a lift around 2 kHz make consonants and vocals clearer; in the treble the ER4 reaches farther and responds more dynamically. The stage is more accurate in depth; width and height impress on both.
He also calls the ER4SR kit richer: a hard case, more tips, a shielded cable, a 6.35 mm adapter. In overview the ER4SR remains ahead in several respects, the ER3SE a very good, less expensive alternative. The comparison covers the exact ER4SR, not the ER4XR.
Research consensus
Both pillars treat the ER4SR as a precise, deliberately flat single-BA reference with high isolation, deep insertion and more dynamic finesse than the less expensive ER3 studio version. SoundGuys stresses the near-reference character and how hard it is to recommend to typical entertainment listeners; Major HiFi stresses the lead in tightness, midrange drawing, treble reach and stage depth over the ER3SE.
Westone Audio supports that picture technically with 45 Ω, 98 dB at 1 mW and 20 Hz–16 kHz. There is no conflict over the model identity: both texts mean the ER4SR, not the ER4XR.
Accessories and use
Major HiFi lists a richer kit for the ER4SR than for the ER3SE: a detachable, shielded cable, a hard case, four pairs of triple-flange tips, two pairs of foam, a filter tool and spares, a shirt clip, documentation and a 6.35 mm adapter.
SoundGuys highlights the replaceable cable and the many tips for the fit. Deep insertion remains the comfort-defining feature and the familiar price of the drawing.
The individually shielded cable is what sets the ER4 apart outwardly from the ER3 series. That feeds the build subscore; this page does not measure the cable itself.
Price and availability
The documented euro price is €379.99 at Westone Audio EU, retrieved on 12 November 2026, with InStock and the note that orders placed before 16:00 ship the same day. The price matches the ER4XR in the same shop.
Dollar prices from the listening reviews are not converted. The shop is the official European Etymotic channel.
In the Expert tier, €379.99 sits close to the Hype 4 MKII (€375.29), Edge (€395.00) and Iris (€399.00). The subscore of 7.4 follows that frame and matches the ER4XR, without taking the tier’s value badge.
On an amplifier and on a vinyl system
On a typical phono amplifier with a headphone output, the question is whether 45 Ω and 98 dB at 1 mW find enough level and damping. The pillars describe a near-reference model that is not especially loud; a voltage-capable, low-noise output is more useful than a large surplus of power.
Because SoundGuys paints a deliberately flat, little-embellished character, a bass-heavy, warm output is an intervention in exactly what the tuning is meant to show. A neutral, well-controlled output remains the closer choice.
The high isolation makes the listening seat quiet and close. That supports concentrated listening at the record player and at the same time limits typical entertainment width.
Who is the Etymotic ER4SR for?
According to the pillars, the ER4SR suits listeners who want a deliberately flat single-BA reference with high isolation, deep insertion and more dynamic finesse than the ER3 series, and who do not expect typical bass thump.
It is a poorer match for a wish for impact in the low bass, for a shallow fit, or for a pleasing everyday profile. SoundGuys states clearly how hard it is to recommend to typical entertainment listeners.
As the studio version of the ER4 line the reviews support the model. They do not put it in the place of the ER4XR or of the Iris in the same tier.
How it compares
Against the Etymotic ER4XR on the shared index 71 (rank 12, sound 7.4) the same sound-evidence score meets an identical price. The SR is the flatter studio version, the XR the tuning with more low bass; alphabetically the ER4SR sits in rank 13 ahead of the ER4XR.
Against the Westone MACH 20 (rank 15, index 71, sound 7.2) and the Final A5000 (rank 16, index 71, sound 7.0) the higher sound-evidence score of 7.4 remains the decisive tie-break.
Against the Etymotic ER3SE in Premium (rank 24, index 56, sound 7.3) the ER4SR remains the dearer studio model, heard ahead in tightness, dynamic finesse and stage depth, a lead Major HiFi grants expressly.
Place on the expanded list
The in-ear shortlist of 12 November 2026 carries, after this expansion, 80 wired models: eight in Starter, thirty-four in Premium, seventeen in Expert and twenty-one in Master. The Etymotic ER4SR belongs in the Expert tier and does not move the badges of that tier.
The Expert mapping still uses the 70–84 band. There is no required gap between places. The Etymotic ER4SR, at a raw score of 7.44, sits at index 71 and rank 11. It shares index 71 with the Etymotic ER4XR, the Westone MACH 20 and the Final A5000; at the same index and the same sound-evidence score of 7.4 as the ER4XR, the same documented euro price leaves the alphabetical name to decide, so the ER4SR ranks ahead of the ER4XR, and the MACH 20 and A5000 follow with lower sound-evidence scores.
This analysis is reachable from the shortlist. The package remains an isolated product package without list, sitemap or kb.js files. Upload is not approved; automatic submission of new URLs is not provided for.
FAQ
Is the ER4SR the same as the ER4XR?
No. The ER4SR is the flatter studio version. This page lists only the ER4SR, for which dated listening reviews and a documented euro price exist.
Is the ER4SR the same as the ER3SE?
No. The ER3SE belongs to the less expensive ER3 line and sits in the Premium tier. Major HiFi hears the ER4SR ahead in several respects.
Why does the EU shop list 120 cm for the ER4SR and 152 cm for the ER4XR?
Both lengths appear as such on the respective Westone Audio EU pages. This analysis takes the figure on the ER4SR page and discloses the difference, rather than inventing a length.
Does the ER4SR take an Expert-tier badge?
No. The Sound badge remains with the Campfire Audio Iris, and the value badge with the Moondrop Blessing 3.
Conclusion
In the listening reviews to hand, the Etymotic ER4SR remains a deliberately flat, precise single-BA reference with high isolation, deep insertion and more dynamic finesse than the less expensive ER3 studio version. The limits lie in typical bass thump, in appeal to entertainment listeners, and in the fit.
On the shortlist of 12 November 2026 it sits in the Expert tier, now expanded to seventeen models, in rank 13 with index 71, with no badge, at €379.99 in the official EU shop. It shares index 71 with the ER4XR, the MACH 20 and the A5000; alphabetically it ranks ahead of the ER4XR.
The analysis takes the list record and the published pillars as they stand; this page does not conduct in-house listening tests or measurements.
About this AI analysis
This section is an AI summary of published international listening reviews and the manufacturer’s published figures. Vinyl BotPro places those findings against the data sheet, a documented euro price and the list record; VinylCination does not conduct in-house listening tests or measurements, and every source is linked at the end of the page. Prices and availability change (as of 12 November 2026, without guarantee). Subscores and the index come from the list package of the same day. The Vinyl BotPro index maps the unrounded raw score linearly onto the tier band; equal or closely spaced raw scores may share an index.