Floorstanding speaker · AI analysis · Master, rank 14

Focal Kanta N°2 Review

AI analysis (research): largest floorstander of the Kanta series with beryllium tweeter and Flax sandwich drivers; based on manufacturer data and Stereophile.

AI research Master AI analysis Index 87 Prices as of Sept. 2026
Focal Kanta N°2 review, floorstanding speaker
Photo: manufacturer Focal · product photo for illustration only.

Summary

The Kanta N°2 (approx. 9,498 €/pair) combines a tweeter with an inverted pure-beryllium dome (IAL3) with three 16.5 cm Flax sandwich drivers. Focal develops and manufactures all drivers in France. Focal quotes 91 dB sensitivity, 35 Hz to 40 kHz and 8 Ω (minimum 3.1 Ω).

Specs (public / manufacturer)

Type3-way floorstanding speaker · bass reflex (Power Flow, ports front and rear)
Chassis27 mm IAL3 beryllium dome (inverted) · 16.5 cm Flax midrange with TMD and NIC · 2 × 16.5 cm Flax woofers with NIC
Frequency response35 Hz–40 kHz (±3 dB) · 29 Hz (−6 dB) · crossover 260 / 2,700 Hz
Sensitivity91 dB (2.83 V/1 m)
Impedance8 Ω nominal (min. 3.1 Ω)
Amplifier power40–300 W · rooms from 30 m², up to 60 m²
Dimensions / weight1,118 × 321 × 477 mm (H × B × T) · 35 kg/piece
Price guideapprox. €9,498/pair · Sept 2026
Manufacturer specifications (Focal)
Manufacturer data sheet
Type3-way floorstanding speaker · bass reflex (Power Flow, front and rear ports)
Drivers27 mm IAL3 pure beryllium inverted dome · 16.5 cm Flax midrange with TMD and NIC · 2 × 16.5 cm Flax woofers with NIC
Frequency response35 Hz–40 kHz (±3 dB) · 29 Hz (−6 dB)
Sensitivity91 dB (2.83 V/1 m)
Impedance8 Ω nominal (min. 3.1 Ω)
Recommended amplifier power40–300 W (manufacturer recommendation)
Crossover frequency260 Hz / 2.700 Hz
Dimensions1,118 × 321 × 477 mm (H × W × D)
Weight35 kg (with grille)
Room recommendationup to 30 m², larger rooms up to 60 m²

Source: Focal – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Good fit: Powerful amplifiers that stay stable even into 3 Ω
  • Good fit: Rooms from 30 m²
  • Good fit: Tube and solid-state amplifiers, thanks to 91 dB
  • Less suited: very small rooms
  • Less suited: Placement right against the wall (rear port)

Technology in detail

For the treble, the Kanta N°2 uses Focal's IAL3 tweeter with an inverted dome of pure beryllium (27 mm). Beryllium is very light and stiff and, according to Focal, reaches up to 40 kHz.

Midrange and woofers (16.5 cm each) have Flax sandwich cones: flax fibres between two layers of glass fibre. The midrange has the TMD surround to reduce distortion, and all three drivers use Focal's NIC motor. The crossover points are 260 and 2,700 Hz.

The Power Flow bass-reflex system uses openings at the front and rear. Focal quotes 91 dB sensitivity and 8 Ω with a minimum of 3.1 Ω; 40 to 300 W is recommended. The speaker measures 1,118 × 321 × 477 mm, weighs 35 kg and, according to Focal, suits rooms from 30 m², up to 60 m².

What the specialist press says

One review describes the Kanta N°2 as dynamic and well balanced, highly transparent to the source, with first-rate imaging and surprisingly deep bass; it is listed in Recommended Components.

Who is it for?

For vinyl listeners with a larger room looking for a high-sensitivity floorstander with a beryllium tweeter.

What makes this AI analysis special

This AI analysis combines Focal's data sheet with the review in international magazines. All measurements are manufacturer specifications. As of October 2026.

How the score comes about

The index reflects the beryllium tweeter, the in-house Flax drivers, the high sensitivity and the very positive review in international magazines. The Vinyl BotPro Index on this page remains 87 (Master, rank 14) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology

Sources

Vinyl BotPro Index: 87 (Master 85–97) · Label: AI research · Sept 2026