Cartridge · AI analysis · Starter, rank 9

Goldring E2 Review

AI analysis (research): MM cartridge from the Goldring E series with spherical tip and dual-magnet generator; based on manufacturer data.

AI research Starter AI analysis Index 44 Prices as of Sept. 2026
Goldring E2 review, cartridge
Photo: manufacturer Goldring · product photo for illustration only.

Summary

The E2 (approx. €70–100) combines a spherical diamond (0.6 mil) with an aluminium cantilever. Goldring specifies 3.5 mV output, 20 mm/N static compliance and 2 g tracking force (1.75–2.25 g). "Magnetic Duplex Technology" uses two magnets in the geometry of a cutting head.

Specs (public / manufacturer)

Type / StylusMM · spherical 0.6 mil (15 µm), bonded · Aluminium cantilever
Output3.5 mV ± 3 dB (5 cm/s)
Frequency response20 Hz–20 kHz ± 3 dB · Range 12 Hz–20 kHz
Channel separationmin. 20 dB (1 kHz) · Balance max. 1.5 dB
ComplianceStatic 20 mm/N · Tracking ability 70 µm
Tracking force1.75–2.25 g · nominal 2 g · VTA 24°
Load47 kΩ · 100–200 pF (150 pF nominal)
Weight6.8 g (7.8 g with mounting) · Tonearm 10–30 g effective mass
Price guideapprox. €70–100 · Sept 2026
Manufacturer specifications (Goldring)
Manufacturer data sheet
Type / StylusMM · spherical 0.6 mil (15 µm), bonded · Aluminium cantilever
Output3.5 mV ± 3 dB (5 cm/s)
Frequency response20 Hz–20 kHz ± 3 dB · Range 12 Hz–20 kHz
Channel separationmin. 20 dB (1 kHz) · Balance max. 1.5 dB
ComplianceStatic 20 mm/N · Tracking ability 70 µm
Tracking force1.75–2.25 g · nominal 2 g · VTA 24°
Load47 kΩ · 100–200 pF (150 pF nominal)
Weight6.8 g (7.8 g with mounting) · Tonearm 10–30 g effective mass

Source: Goldring – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Good fit: Upgrading a pre-mounted entry-level cartridge
  • Good fit: Tonearms with 10–30 g effective mass
  • Good fit: First set-up of your own (pre-set stylus angle)
  • Less suited: Anyone who wants an elliptical tip straight away (e.g. Goldring E3)
  • Less suited: Very light tonearms under 10 g

Technology in detail

In the E2, Goldring uses a bonded spherical diamond with a 15 µm (0.6 mil) radius on an aluminium cantilever. According to Goldring, the E1 and E2 suit as an upgrade for budget, pre-mounted or discontinued cartridges.

All models in the E series use "Magnetic Duplex Technology": a generator with two magnets whose geometry matches that of a cutting head. This is meant to reproduce stereo information more precisely and improve channel separation. During production the stylus angle is pre-set with an adjustment screw, so no horizontal readjustment is needed.

Goldring specifies 3.5 mV output, 20 mm/N static compliance, 70 µm tracking ability and 2 g tracking force (1.75–2.25 g). Recommended are 47 kΩ at 100–200 pF and tonearms with 10–30 g effective mass; the cartridge weighs 6.8 g.

What the specialist press says

For this model, the international specialist press evaluated here had not published a review at the time of research. The assessment is based on the manufacturer data.

Who is it for?

For anyone who wants to replace a pre-mounted entry-level cartridge with a robust, uncomplicated MM cartridge.

What makes this AI analysis special

This AI analysis is based on Goldring's product page and specifications; all figures are manufacturer data. As of October 2026.

How the score comes about

The index reflects the solid equipment with a dual-magnet generator at a low price and the simple spherical tip. The Vinyl BotPro Index on this page remains 44 (Starter, rank 9) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology

Sources

Vinyl BotPro Index: 44 (Starter 40–54) · Label: AI research · Sept 2026