Cartridge · AI analysis · Starter, rank 7

Grado Prestige Green4 Review

AI analysis (research): entry model of the current Grado Prestige series 4 — moving-iron cartridge with elliptical diamond and user-replaceable stylus. Manufacturer data and international trade press, no listening test.

AI research Starter Index 47 / 100 Rank 7 in Starter Prices as of Oct. 2026
Grado Prestige Green4 review, cartridge
Photo: manufacturer Grado · product photo for illustration only.

Summary

47Vinyl BotPro Index · rank 7 (starter)

Grado has replaced the Prestige series 3 with the series 4; the Green4 is its entry model. All three Prestige models share the body, cantilever and Flux-Bridger generator; according to Grado they differ in component selection and tolerances. Data sheet: 4 mV output, 10–55,000 Hz, 1.6–1.9 g tracking force, 20 µm/mN compliance, 6 g weight. Grado lists US$140 (US list, as of Oct. 2026, without guarantee).

Successor

Replaces the Grado Prestige Black3. The Prestige series 3 has been discontinued; the Green4 is the new entry model of the series.

Assumptions

  • US list US$140 (as of Oct. 2026), euro price varies
  • Standard mount assessed
  • MI-typical hum sensitivity taken into account

Specifications (manufacturer)

DesignMoving iron · elliptical diamond · replaceable stylus
Output / load4 mV · 10–47 kΩ
Tracking force / compliance1.6–1.9 g · 20 µm/mN
Price guideUS$140 (US list) · as of Oct. 2026 · without guarantee
Manufacturer specifications (Grado)
Manufacturer data sheet
TypeMoving iron (Flux-Bridger, twin magnet) · user-replaceable stylus
Output voltage4 mV (5 cm/s, 45°)
Frequency response10–55,000 Hz
Channel separationaverage 25 dB (10–30,000 Hz)
StylusDiamond, elliptical
Input load10–47 kΩ
Inductance / DC resistance50 mH / 660 Ω
Weight6 g
Tracking force1.6–1.9 g
Compliance20 µm/mN
MountingP-mount or ½-inch standard mount
Price (manufacturer)US$140 (US list)

Source: Grado – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Scores in detail

Technology / build
Flux-Bridger MI, elliptical
6.6
Features
replaceable stylus, P-mount option
6.4
Expected performance
data, typically warm Grado voicing
6.6
Value for money
affordable entry
7.2
Total (guidance only)
Tier Starter · Vinyl BotPro Index 47
6.7

Vinyl BotPro Index: 47 · Index band Starter 40–54 · Guidance only, not a lab value.

Strengths

  • User-replaceable stylus, upgrade to Red4/Gold4 possible
  • High output voltage of 4 mV
  • Also available in P-mount
  • Current model with a complete manufacturer data sheet

Weaknesses

  • Hum possible on some turntables
  • No German list price published
  • Elliptical stylus only entry level
  • Hardly any independent tests of series 4

Comparison models

Audio-Technica AT-VM95EPrice/Performance champion of the tier, MM
Nagaoka MP-110Sound champion of the tier, MP principle
Ortofon OM 10Affordable MM with stylus upgrade path

System matching

Works well with

  • Entry-level turntables with light to medium-mass arms
  • MM phono inputs on integrated amplifiers
  • Turntables without motor hum issues (MI design)

Less suited

  • Turntables with unshielded motors
  • Anyone looking for finer stylus profiles

Vinyl in practice

Grado moving-iron cartridges can hum on some turntables with unshielded motors — check the combination before buying. Helpful: Compatibility: cartridge & turntable.

Technology in detail

The Prestige Green4 is the entry model of the Grado Prestige series 4. The moving-iron principle (Flux-Bridger, twin magnet) moves only a small iron part; magnets and coils sit fixed in the body. According to Grado: 4 mV, 10–55,000 Hz, elliptical diamond, 1.6–1.9 g tracking force, 20 µm/mN compliance and 6 g weight.

The user replaces the stylus; Red4 and Gold4 styli fit the same body. The cartridge is available with standard or P-mount. Compared with series 3, Grado cites new coils and a revised body.

What the specialist press says

For the new Prestige series 4, as of Oct. 2026 there were mainly launch announcements. AV Magazine (Italy) summarises: all Prestige models use elliptical styli, aluminium cantilevers and 5N OCC copper coils; Grado cryogenically treats and internally damps every cartridge. ecoustics describes the relaunch of all three Grado series in 2026.

For the predecessors of series 3, the trade press described a warm, musical Grado character; this can only be carried over to series 4 as a tendency. Vinyl BotPro says so explicitly — no listening experience of our own.

Who is it for?

Tonearm

6 g and 20 µm/mN suit light to medium-mass arms. Check for hum with unshielded motors first: Compatibility.

Phono

4 mV into 47 kΩ — any MM phono stage will do, see Phono stages.

Upgrade

The cartridge can later be upgraded with a Red4 or Gold4 stylus.

The special features of this analysis

This AI analysis brings together manufacturer specifications, technical data and the verdicts of the specialist press in a compact assessment. It shows where the sources agree, which strengths come up again and again, and which system the product suits best. Prices as of Oct. 2026.

How the score comes about

Vinyl BotPro Index 0–100; technology/build, features, expected performance and price/performance are weighted 25/20/25/30. Starter is typically ~40–54. It takes over the Black3's index of 47: technology and price class match the predecessor. It ranks in Starter behind the Sumiko Rainier. No listening test. Details on weighting · Methodology.

Sources

Created by Vinyl BotPro (AI) · AI analysis · As of 16.10.2026 · Corrections: info@vinylcination.de · Prices without guarantee.