Cartridge · AI analysis · Expert, rank 7

Hana SH Mk II Review

AI analysis (research): successor to the Hana SH — high-output MC with 2 mV, Nude Shibata stylus and a new tapered aluminium cantilever, usable with a normal MM input. Manufacturer data and international trade press, no listening test.

AI research Expert Index 77 / 100 Rank 7 in Expert Prices as of Oct. 2026
Hana SH Mk II review, cartridge
Photo: manufacturer Hana · product photo for illustration only.

Summary

77Vinyl BotPro Index · rank 7 (Expert)

The Hana SH Mk II replaces the Hana SH, which the manufacturer no longer offers. With 2 mV output and a recommended load of 47 kΩ it runs on a standard MM input; a step-up transformer or MC stage is not needed. As with the SL Mk II, it adds a tapered aluminium cantilever, cryo-treated generator parts and a new body with a brass top plate; the weight rises to 8.6 g. US list price 850 $, in Europe around 850 € (as of Oct. 2026, without guarantee).

Successor

Replaces the Hana SH, which Hana no longer offers. The SH Mk II is the official successor in the S series.

Assumptions

  • Requires an MM phono stage with enough gain for 2 mV
  • European price approx. 850 € as a guide (US list 850 $, as of Oct. 2026)
  • Medium-mass tonearm for 8.6 g

Specifications (manufacturer)

Type / StylusMC, high output · Nude Shibata · tapered aluminium cantilever
Output / Impedance2 mV (1 kHz) · 130 Ω
Load / tracking force47 kΩ · 2 g
Weight8.6 g
Price guideapprox. €850 · US list US$850 · as of Oct. 2026 · without guarantee
Manufacturer specifications (Hana)
Manufacturer data sheet
TypeMoving coil, high output (HO-MC)
Stylus / cantileverShibata (nude) · tapered aluminium
Output / balance2 mV (1 kHz) · <1.5 dB (1 kHz)
Tracking force / trackability2 g · 70 µm at 2 g
Channel separation / frequency response28 dB (1 kHz) · 15–32,000 Hz
Impedance / recommended load130 Ω (1 kHz) · 47 kΩ
Weight / colour8.6 g · black
Warranty2 years
Price (manufacturer)US$850 (US list)

Source: Hana – official specifications · As of 18 October 2026 · subject to change by the manufacturer

Scores in detail

Technology / build
Nude Shibata, tapered alu cantilever, cryo parts
8.6
Features
MM input is enough, threaded top plate
7.8
Expected performance
Press: warm, coherent, strong midrange
8.6
Value for money
Saves a step-up transformer or MC stage
8.0
Total (guidance only)
Tier Expert · Vinyl BotPro Index 77
8.3

Vinyl BotPro Index: 77 · Index band Expert 70–84 · Guidance only, not a lab value.

Strengths

  • Shibata MC without step-up transformer or MC stage
  • 2 mV and 47 kΩ suit most MM phono stages
  • Tapered aluminium cantilever as on the SL Mk II
  • Threaded brass top plate, 8.6 g suits many arms

Weaknesses

  • 2 mV is quieter than typical MM cartridges — the MM stage must be low-noise
  • Stylus not user-replaceable
  • Less extension at the frequency extremes than the Umami Red
  • Same price as the SL Mk II

Comparison models

Hana SL Mk IILow-output sister, slightly more finely detailed, needs MC gain
Ortofon 2M BlackMM with Shibata and replaceable stylus
Hana EH Mk IIHigh-output version of the E series with elliptical stylus, cheaper

System matching

Works well with

  • Amplifiers with a good MM phono input
  • Medium-mass tonearms
  • Listeners moving from MM to MC character

Less suited

  • Very quiet or noisy MM stages
  • Listeners who want to replace the stylus themselves
  • Low-output chains with a good MC input (then rather the SL Mk II)

Vinyl in practice

At 2 mV the SH Mk II is quieter than a typical MM cartridge (usually 4–5 mV); the MM stage should therefore offer enough gain and little noise. Suitable phono stages: phono preamplifier top list.

Technology in detail

The SH Mk II is the high-output version of the revised S series. Stylus (Nude Shibata), tapered aluminium cantilever, cryo-treated generator parts and the new body with brass top plate are the same as on the SL Mk II.

The difference lies in the generator: according to Hana, more windings give 2 mV output at 130 Ω internal impedance, with a recommended load of 47 kΩ — the values of an MM input. Hana further quotes 15–32,000 Hz, 28 dB channel separation, 2 g tracking force, 70 µm trackability and 8.6 g weight.

What the specialist press says

The international specialist press describes the SH Mk II as much closer to the Umami Red than the old SH: coherent, smooth, with strong midrange for voices and guitars, slightly warmer than the Umami Red but less extended at the frequency extremes; in its class the author sees little that is better. One review hears a very similar tuning to the SL Mk II, with slightly more fine detail from the SL, and calls the SH a bargain if no MC input is available. High Fidelity (Poland) praises higher resolution, a large soundstage and clean tracking of dense passages for both the SL Mk II and SH Mk II.

Recurring pattern: MC character on the MM input, warm and midrange-focused, with small compromises at the frequency extremes. Magazine verdicts, summarised by Vinyl BotPro — no listening experience of our own.

Who is it for?

phono stage

A good MM input with 47 kΩ is sufficient; because 2 mV is below typical MM values, the stage should have enough gain and little noise.

Tonearm

8.6 g and the threaded top plate suit most medium-mass arms; very light arms need extra weight.

Alternatives

With a good MC input the SL Mk II is the more refined choice; the EH Mk II with elliptical stylus remains cheaper.

The special features of this analysis

This AI analysis brings together manufacturer specifications, technical data and the verdicts of the specialist press in a compact assessment. It shows where the sources agree, which strengths come up again and again, and which system the product suits best. Prices as of Oct. 2026.

How the score comes about

Vinyl BotPro Index 0–100; technology/build, features, expected performance and price/performance are weighted 25/20/25/30. Expert is typically ~70–84. Compared with its predecessor (index 75) it rises to 77: the international specialist press sees the Mk II as clearly improved, and running it on the MM input saves money on a step-up transformer or MC stage. It stays behind its low-output sibling SL Mk II because reviewers credit the SL with slightly more fine detail. No listening test. Details on weighting · Methodology.

Sources

Created by Vinyl BotPro (AI) · AI analysis · As of 18.10.2026 · Corrections: info@vinylcination.de · Prices without guarantee.