Speaker cable · AI analysis · Master, rank 5

in-akustik Referenz LS-2405 AIR Review

AI analysis (research): 2 × 4.8 mm² (8 × 1.2 mm²) · OFC, 2–5 m · BFA-Banana/Spade lug, rhodium-coated contacts — manufacturer specifications and retailer prices, no listening test.

AI research Master Index 91 / 100 Price as of Sept 2026

Summary

in-akustik Referenz LS-2405 AIR (terminated, AIR-Helix, 8-strand Multicore): 2 × 4.8 mm² (8 × 1.2 mm²) · OFC; 2–5 m · BFA-Banana/spade lug, rhodium-treated contacts. Price: from €3,775 (pair) · price as of Sept 2026. Large reserve for cross-section at a very high price; the cable diameter of 24 mm makes it difficult to install.

At usual lengths (up to approx. 5–10 m), what matters most is an adequate cross-section and a clean, firm connection; audible sound differences between speaker cables are scientifically disputed.

Assumptions

  • Prices: consumer prices incl. VAT, as of Sept 2026 (manufacturer or retailer page); they may change
  • Details from the manufacturer’s shop or datasheet, or the retailer’s page; availability may differ and was not checked for every variant.
  • Living-room system with cable runs of up to approx. 5–10 m
  • No measurements or listening tests of our own

Specs (public / manufacturer)

TypeTerminated · AIR-Helix, 8-fold multicore
Cross-section / conductor2 × 4.8 mm² (8 × 1.2 mm²) · OFC
Conductor materialHigh purity OFC
ConstructionAir dielectric, AIR-Helix-Construction, PE mesh jacket, Ø 24 mm
Termination / connection2–5 m · BFA-Banana/spade lug, rhodium-treated contacts
Length2–5 m
Manufacturer / originin-akustik, Made in Germany
Price guidePair from €3,775 (shortest length) · Price as of Sept 2026
Manufacturer specifications (in-akustik)
Manufacturer data sheet
Typehigh-end speaker cable, Referenz AIR (AIR Helix point-to-point, multicore)
Cross-section2 × 4.8 mm² (8 × 1.2 mm²)
Conductorhigh-purity OFC, Cross Link Super Speed waveguide
Design8-fold double-layer multicore
Insulationair dielectric, PE network jacket
Outer diameter24 mm
TerminationBFA banana 360° (beryllium copper) / spade 360° (tellurium copper), rhodium-coated, 1.5 t pressed; SW or SBW
Lengths2–5 m (0.5 m steps)
Resistancenot specified by manufacturer

Source: in-akustik – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Scores in detail

Data basis
cross-section and material documented, some details missing
8.0
Cross-section / termination
2 × 4.8 mm² (8 × 1.2 mm²) · OFC · 2–5 m
8.5
Build quality / connections
2–5 m · BFA-Banana/spade lug, rhodium-treated contacts
9.5
Value for money
high price for limited demonstrable added value
2.5
Vinyl BotPro Index
Weighted 20/30/20/30, then scaled across all tiers
91

Vinyl BotPro Index: 91 (Master 85–97) · Sub-scores 0–10 from data basis, cross-section/termination, build quality/connections and value for money (weights 20/30/20/30); no listening-based sound score · Guidance only, not a lab value.

Strengths

  • 4.8 mm² cross-section
  • Build quality

Weaknesses

  • Price
  • Cable diameter 24 mm

Comparison models

in-akustik Referenz LS-8005 AIR2 × 19.2 mm² (32 × 1.2 mm²) · OFC · from €15,822 (pair)
in-akustik Referenz LS-4005 AIR Pure Silver2 × 9.6 mm² (16 × 1.2 mm²) · High purity silver · from €27,467 (pair)
Oehlbach Fusion Four (spade lug)4 × 4.0 mm² · HPOCC (monocrystalline OFC) · from €1,020 (2 m); €3 m 1,260

System matching

Works well with

  • If you are looking for construction and build quality

Less suited

  • Close relocation
  • Price-conscious buyers

Created by Vinyl BotPro (AI) · As of Sept 2026 · All information is provided without guarantee; prices change and manufacturer specifications may differ.