Speaker cable · AI analysis · Master, rank 2

Oehlbach Fusion Four.4 Review

AI analysis (research): 4 × 4.0 mm² · HPOCC, e.g. 3.5 m · cable lug or bananas, 24 ct gold-plated · up to 400 W (manufacturer) — manufacturer data and retail prices, no listening test.

AI research Master Index 95 / 100 Price as of Sept 2026

Summary

Oehlbach Fusion Four.4 (terminated, bi-amping, pair): 4 × 4.0 mm² · HPOCC; e.g. 3.5 m · cable lug or bananas, 24 ct gold-plated · up to 400 W (manufacturer). Price: from €1,140 (shortest length); 4.5 m €1,799 · Price as of Sept 2026. Bi-amping requires two power amplifiers or one power amplifier pair and speaker with separate inputs; otherwise the cable has no advantage.

At usual lengths (up to approx. 5–10 m), what matters most is an adequate cross-section and a clean, firm connection; audible sound differences between speaker cables are scientifically disputed.

Assumptions

  • Prices: consumer prices incl. VAT, as of Sept 2026 (manufacturer or retailer page); they may change
  • Details from the manufacturer’s shop or datasheet, or the retailer’s page; availability may differ and was not checked for every variant.
  • Living-room system with cable runs of up to approx. 5–10 m
  • No measurements or listening tests of our own

Specs (public / manufacturer)

TypeTerminated · Bi-amping, couple
Cross-section / conductor4 × 4.0 mm² · HPOCC
Conductor materialHPOCC (monocrystalline oxygen-free copper)
ConstructionRound, fabric sheath, designed for bi-amping
Termination / connectionu. a. 3.5 m · cable lug (Fusion Four.4) or bananas (Fusion Four.4 B), 24 ct gold-plated · Up to 400 W (manufacturer)
Lengthe.g. 3.5 m (per Oehlbach)
Manufacturer / originOehlbach, made in Germany, 30-year warranty (per Oehlbach)
Price guidePair from €1,140 (shortest length), 4.5 m €1,799 · Price as of Sept 2026
Manufacturer specifications (Oehlbach)
Manufacturer data sheet
Typestereo speaker cable
Cross-section4 × 4.0 mm²
ConductorHPOCC® (mono-crystalline oxygen-free copper)
Constructionround, rigorously separated signal routes (bi-amping)
Insulationfabric sheath, black
Amplifier power (recommendation)for amplifier output up to 400 W
Lengthsterminated, e.g. 3.5 m
Termination24 ct gold-plated contacts, solid metal (cable lug; banana version Fusion Four.4 B); made in Germany
Resistancenot specified by manufacturer
Warranty30 years (electrical function, per Oehlbach)

Source: Oehlbach – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Scores in detail

Data basis
Cross-section, material and construction documented in manufacturer and retailer details
9.0
Cross-section / termination
4 × 4.0 mm² · HPOCC · 2–5 m
8.5
Build quality / connections
e.g. 3.5 m · cable lug or bananas, 24 ct gold-plated · up to 400 W (manufacturer)
9.5
Value for money
high price for limited demonstrable added value
3.5
Vinyl BotPro Index
Weighted 20/30/20/30, then scaled across all tiers
95

Vinyl BotPro Index: 95 (Master 85–97) · Sub-scores 0–10 from data basis, cross-section/termination, build quality/connections and value for money (weights 20/30/20/30); no listening-based sound score · Guidance only, not a lab value.

Strengths

  • 4 × 4.0 mm² HPOCC
  • Build quality

Weaknesses

  • Only for bi-amping
  • High price

Comparison models

Oehlbach Fusion Four (spade lug)4 × 4.0 mm² · HPOCC (monocrystalline OFC) · from €1,020 (2 m); €3 m 1,260
in-akustik Referenz LS-4005 AIR2 × 9.6 mm² (16 × 1.2 mm²) · OFC · from €5,950 (pair)

System matching

Works well with

  • Bi-amping setups

Less suited

  • All single amp systems

Created by Vinyl BotPro (AI) · As of Sept 2026 · All information is provided without guarantee; prices change and manufacturer specifications may differ.

Manufacturer and concept

Oehlbach is a German cable maker from the Cologne area that has offered connections for hi-fi, home cinema and multimedia for decades. The Fusion range is among the brand's high-end speaker cables. The Fusion Four.4 is the bi-amping version: a terminated pair of cables with four conductors per side, intended for systems in which the treble and bass sections of a speaker are driven by separate amplifier channels.

According to Oehlbach, each cable has four conductors of 4.0 mm² each, made of HPOCC copper, i.e. monocrystalline oxygen-free copper. The ends are terminated with 24-carat gold-plated all-metal spade connectors; a banana-plug version is available as the Fusion Four.4 B. Oehlbach rates the cable for amplifier power up to 400 W, states that it is made in Germany and gives a 30-year warranty on the electrical function.

Bi-amping and bi-wiring explained

Many speakers have two pairs of terminals: one for the bass section and one for the treble section of the crossover. From the factory, both pairs are linked with jumpers. There are two ways to use both pairs.

With bi-wiring, two separate cable pairs run from one amplifier channel to the speaker, one to the bass terminals and one to the treble terminals. Electrically, little changes because both pairs hang off the same amplifier output. Whether it brings any audible benefit is disputed.

With bi-amping, each section gets its own amplifier channel. One channel drives only the woofer, the other only the tweeter. The advantage: strong bass impulses do not load the channel feeding the tweeter, and each amplifier sees a simpler load. The cost is two power amplifier channels per speaker, four for a stereo system, for example two stereo power amps or a multichannel amplifier with a bi-amp function.

The Fusion Four.4 is designed for bi-amping. According to Oehlbach, it keeps the signal paths strictly separate. Technically, it can also be used for bi-wiring from a single amplifier channel; in that case two conductors go to each amplifier terminal.

What cross-section and material mean

Resistance

The most important electrical property of a speaker cable is its resistance. It depends on length, cross-section and material. Copper has a resistivity of about 0.0172 Ω·mm²/m, so a 4.0 mm² conductor has around 0.0043 Ω per metre. With a 3.5 m cable, current flows through the outgoing and return conductors, i.e. 7 m, giving about 0.03 Ω per section. Oehlbach does not state a resistance figure; this calculation is based on the cross-section.

Into a 4 Ω speaker, 0.03 Ω means a level loss of less than 0.1 dB, which is inaudible. The amplifier's damping factor, its control over cone movement, is also barely affected by such a low resistance. In short: 4.0 mm² is more than enough electrically for living-room lengths.

HPOCC copper

HPOCC refers to a casting process that produces copper with very long crystals. The idea is that fewer grain boundaries in the conductor disturb the signal less. In measurement terms, the difference from ordinary oxygen-free copper at audio frequencies is very small. One advantage is the good corrosion resistance of oxygen-free copper, which favours stable connections over the long term.

Spades and gold plating

Spade connectors go under the binding posts and are tightened down. That gives a large-area, firm connection that does not work loose. Gold plating protects the contacts from oxidation. Make sure the amplifier and speaker terminals can take spades; with small-diameter posts or spring clips, the banana version is a better fit.

Do cables sound different?

We found no independent international reviews of the Fusion Four.4, and we did not carry out our own listening or measurement tests. Whether speaker cables with adequate cross-section sound audibly different is scientifically disputed. Electrically, resistance, inductance and capacitance are what matter at audio frequencies. At typical lengths of up to about 5 to 10 m and with adequate cross-section, these values are so small that controlled blind tests usually find no reliable differences.

Poor connections, on the other hand, are audible: loose terminals, oxidised strands or cables that are too thin over long runs. A well-terminated cable like the Fusion Four.4 reliably eliminates these sources of error. If you buy it, you are mainly paying for build quality, termination, looks and a long warranty.

When the Fusion Four.4 makes sense

The cable only makes sense if three conditions are met: the speakers have two pairs of terminals, four amplifier channels are available, and the system is of a quality where the price is proportionate. With speakers that have only one pair of terminals, the cable offers no benefit. For normal stereo systems with one integrated amplifier, a simple two-conductor cable is enough.

Before connecting for bi-amping, the jumpers between the terminal pairs must be removed. Otherwise the outputs of two amplifier channels are tied directly together, which can damage the amplifiers. Both amplifiers should also have the same gain, or the balance between treble and bass will shift.

Choosing the right length

Terminated cables cannot be shortened without losing the termination. So measure the required length carefully in advance: from the amplifier terminal along the planned cable route to the speaker terminal, plus some slack for bends. Both channels should be the same length even if one speaker is closer; the electrical difference is small, but equal lengths are tidier and avoid arguments about channel differences. With 4.0 mm², resistance stays very low even at 10 m.

Routing and care

A cable with four 4.0 mm² conductors is fairly thick and stiff. Before buying, check the cable route: tight bends behind furniture or in cable ducts stress the termination. The cables should not run under rugs where people step on them, nor lie directly alongside mains cables. Re-tighten the binding posts after a few weeks, as connections can settle slightly with temperature changes. That is all the care such a cable needs.

Price and alternatives

According to Oehlbach, the Fusion Four.4 costs from €1,140 per pair in the shortest length and €1,799 at 4.5 m (as of Sept. 2026). For that money you can also get very good cable by the metre with the same or larger cross-section and terminate it yourself. If you value the looks and the warranty, the Fusion Four.4 is a high-quality complete package; if you only need the electrical function, simpler cables save a lot of money.

Strengths and limits at a glance

Who it suits

The Fusion Four.4 suits owners of high-end bi-amped systems who want a robust, terminated cable with a long warranty and are willing to pay for build quality and looks. It is less suited to systems with a single stereo amplifier and to buyers looking for the best value for money.

Compared with alternatives

All models are listed with index and price in our best speaker cables list.

More questions about the Oehlbach Fusion Four.4

Do I need two amplifiers for this cable?

For true bi-amping, yes: two channels per speaker. For bi-wiring, one amplifier is enough, but the benefit is disputed.

Do I have to remove the jumpers on the speaker?

Yes, for bi-amping this is essential. Otherwise two amplifier outputs are shorted together.

Does the cable fit every amplifier?

The spades fit screw-down binding posts. For spring clips or tight terminals, the banana version Fusion Four.4 B is better.

Is 4.0 mm² enough?

Yes. At 3.5 m the resistance is about 0.03 Ω, a loss of less than 0.1 dB into 4 Ω.

What does the warranty cover?

According to Oehlbach, 30 years on the electrical function. The manufacturer sets out the exact terms.

Verdict

The Oehlbach Fusion Four.4 is a neatly terminated bi-amping cable with a generous cross-section, a long warranty and high-quality connectors. Electrically, it is more than enough for living-room lengths; an audible advantage over good, cheaper cables is not proven. If you run a high-end bi-amped system and value build quality, this is a suitable Master tier cable. First make sure your speakers and amplifiers actually support bi-amping.