Integrated amplifier · AI analysis · Master, rank 10
Pass Labs INT-25 Review
AI analysis (research): Class A integrated amplifier from Pass Labs with a very simple circuit; based on manufacturer data and Stereophile.




Summary
The INT-25 (approx. 6,900–9,890 €) runs in pure Class A with a push-pull output stage. One pair of output transistors per channel is enough, and Pass Labs does without degeneration resistors in the output stage. Output is 25 W into 8 Ω and 50 W into 4 Ω.
Specs (public / manufacturer)
| Type | Stereo integrated amplifier · Push-pull Class A |
|---|---|
| Power | 25 W into 8 Ω (per channel) · into 4 Ω not specified by manufacturer |
| Gain / input | 26 dB · 3 × RCA · 48 kΩ |
| Distortion / noise | 0.1 % at 25 W · below 150 µV |
| Frequency response / damping factor | DC to 100 kHz (−2 dB) · 500 |
| Phono / digital | not built in |
| Dimensions / weight | 432 × 435 × 152 mm · Approx. 23 kg (51 lb) · Remote control |
Manufacturer specifications (Pass Labs)
| Power | 25 W into 8 Ω (per channel) |
|---|---|
| Gain | 29/35 dB |
| Inputs | 3 |
| Volume control | 63 dB (1 dB steps) |
| Power consumption | 200 W |
| Weight | 49 lbs (approx. 22 kg) |
Source: Pass Labs – official specifications · As of 16 October 2026 · subject to change by the manufacturer
Matching tips
- Good fit: High-sensitivity speakers
- Good fit: External phono stage with RCA output
- Good fit: Small to medium-sized rooms
- Less suited: Very power-hungry speakers in large rooms
- Less suited: Anyone who needs a built-in phono stage
Technology in detail
The INT-25 runs in Class A with a push-pull output stage. Each channel uses just one pair of output transistors. Pass Labs has removed the usual degeneration resistors in the output stage; according to the manufacturer, this makes the amplifier faster and quieter.
For voltage gain, Pass Labs uses small new-old-stock JFETs and cascoded MOSFETs. The amplifier is DC-coupled. Pass Labs states 26 dB gain, 48 kΩ input impedance and a damping factor of 500.
Output is 25 W into 8 Ω and 50 W into 4 Ω. Three RCA inputs and a remote control suit the purist concept; there is no built-in phono stage or DAC. The unit weighs around 23 kg and runs warm in use.
What the specialist press says
In international reviews, Herb Reichert calls the INT-25 his new solid-state reference: it editorialises less and sounds more transparent than any preamp/power amp combination he had reviewed until then.
Who is it for?
For vinyl listeners with high-sensitivity speakers who want a particularly pure Class A amplifier.
What makes this AI analysis special
This AI analysis combines Pass Labs' specifications and manual with the review in international magazines. All measurements are manufacturer specifications. As of October 2026.
How the score comes about
The index reflects the pure Class A circuit, the very simple signal path, the high build quality and the very positive review in international magazines. The Vinyl BotPro Index on this page remains 89 (Master, rank 10) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology
Sources
- Pass Labs, INT-25 product page with specifications
- Pass Labs, INT-25 owner's manual (PDF)
- Stereophile, Pass Labs INT-25 review
Vinyl BotPro Index: 89 (Master 85–97) · Label: AI research · Sept 2026
Read more: best amplifiers 2026 · Improve your hi-fi system · What is hi-fi?