Phono preamp · AI analysis · Starter, rank 10

Pro-Ject Phono Box E Review

AI analysis (research): Very affordable MM phono stage with SMD circuitry and internal metal shielding; basis: manufacturer data.

AI research Starter AI analysis Index 45 Prices as of Sept. 2026
Pro-Ject Phono Box E review, phono preamp
Photo: manufacturer Pro-Ject · product photo for illustration only.

Summary

The Phono Box E (approx. €64–79) is a pure MM stage with 47 kΩ / 120 pF and 40 dB of gain. Pro-Ject quotes 88 dB(A) signal-to-noise ratio, under 0.05 % distortion and an RIAA deviation of no more than 0.5 dB. SMD construction, internal metal shielding and an external power supply keep interference out.

Specs (public / manufacturer)

TypeMM phono stage
Entrance47 kΩ / 120 pF
Gain40 dB · type. 500 mV at 5 mV
Measurementssignal-to-noise ratio 88 dB(A) · THD <0.05 %
RIAAmax. 0.5 dB deviation · 20 Hz–20 kHz
ConstructionSMD circuitry · internal metal shielding · gold-plated RCA sockets
Power supplyexternal 18 V / 500 mA · standby <1 W
Dimensions / weight120 × 32 × 100 mm (106 mm with sockets) · 269 g
Price guideapprox. €64–79 · Sept 2026
Manufacturer specifications (Pro-Ject)
Manufacturer data sheet
TypeMM phono preamplifier
Input impedance/capacitance47 kΩ / 120 pF
Gain factor40 dB
Output voltagetyp. 500 mV / 1 kHz at 5 mV / 1 kHz
Signal-to-noise ratio88 dB (A-weighted)
Distortion< 0.05%
RIAA accuracymax. 0.5 dB (20 Hz – 20 kHz)
Connections1 pair RCA in, 1 pair RCA out
Power consumption18 V / 500 mA DC power supply; 20 mA DC; < 1 W standby
Dimensions120 × 32 × 100 (106) mm (W × H × D, D with sockets)
Weight269 g without power supply

Source: Pro-Ject – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Good fit: MM cartridges on a line input
  • A good match: a very small budget
  • Good fit: Placement right next to the turntable
  • Less suitable: MC cartridges
  • Less suitable: anyone who wants to set load or gain

Technology in detail

Pro-Ject aims the Phono Box E at amplifiers without a phono input: it amplifies and equalises the signal of an MM cartridge and passes it to an AUX or line input. The input is 47 kΩ and 120 pF, the gain 40 dB.

The circuit uses SMD technology and follows a concept by Dr. Sykora; low-noise components are meant to keep noise and distortion low. Pro-Ject quotes 88 dB(A) signal-to-noise ratio, under 0.05 % distortion and an RIAA deviation of no more than 0.5 dB between 20 Hz and 20 kHz.

Internal metal shielding and the external 18 V power supply keep interference out. The small case (120 × 32 × 100 mm, 269 g) fits right next to the turntable; inputs and outputs are gold-plated RCA sockets.

What the specialist press says

For this model, the international specialist press evaluated here had not published a review at the time of research. The assessment is based on the manufacturer data.

Who is it for?

For anyone who wants to connect an MM cartridge as cheaply as possible to an amplifier or active speakers without a phono input.

What makes this AI analysis special

This AI analysis is based on Pro-Ject's product page and technical data; all figures are manufacturer specifications. As of October 2026.

How the score comes about

The index reflects the good measurements at a very low price and the deliberately simple MM-only feature set. The Vinyl BotPro Index on this page remains 45 (Starter, rank 10) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology

Sources

Vinyl BotPro Index: 45 (Starter 40–54) · Label: AI research · Sept 2026