Floorstanding speaker · Short analysis · Starter, rank 4

Q Acoustics 3050i Review

Short analysis (research): 2-way floorstanding speaker 91 dB / 6 Ω with 2×165 mm — specs/retailer prices, no listening test.

AI research Starter Short analysis Index 50 Price as of Sept 2026
Q Acoustics 3050i review, floorstanding speaker
Photo: manufacturer Q Acoustics · product photo for illustration only.
Q Acoustics 3050i (2/3) — manufacturer photo
Photo: manufacturer Q Acoustics · additional product photo.
Q Acoustics 3050i (3/3) — manufacturer photo
Photo: manufacturer Q Acoustics · additional product photo.

Summary

The 3050i is Q Acoustics' large floorstanding speaker of the 3000i series: two 165 mm low/midrange drivers, 22 mm tweeter, 91 dB, 6 Ω (min. 4 Ω), frequency range 44 Hz–30 kHz (+3/−6 dB), 1020 mm high, approximately 17.8 kg. The Q Acoustics manual gives the recommended amplifier power as 25–180 W, the Q Acoustics UK product page as 25–100 W (stereo) or 50–165 W (AV receiver). Couple prices are about €748–949. The high sensitivity makes them interesting for small amplifiers.

Assumptions

  • Price per pair Sept 2026
  • Placement with some distance from the wall
  • Amp 25–100/180 W (manufacturer specifications vary)
  • No measurements or listening tests of our own

Specs (public / manufacturer)

Type2-way floorstanding speaker · Bass-reflex
Sensitivity91 dB
Impedance6 Ω average (min. 4 Ω)
Rec. Amplifier power25–100 W stereo / 50–165 W AV (Q Acoustics UK product page) · 25–180 W (Q Acoustics manual)
Frequency range44 Hz–30 kHz (+3/−6 dB)
Chassis2×165 mm · 22 mm tweeter
Dimensions / weight1020 × 320 × 310 mm · 17.8 kg/piece
Price guideapprox. €748–949/pair · Sept 2026
Manufacturer specifications (Q Acoustics)
Manufacturer data sheet
Type2-way floorstanding speaker
Drivers22 mm treble unit · 2 × 165 mm bass units
Frequency response44 Hz–30 kHz (+3/−6 dB)
Sensitivity91 dB (2.83 V/1 m)
Impedance6 Ω average (min. 4 Ω)
Recommended amplifier powerstereo amplifier 25–100 W · AV receiver (2 ch. driven) 50–165 W (UK product page) · 25–180 W (Q Acoustics manual)
Dimensions1,020 × 320 (210 without stabilisers) × 310 mm (H × W × D)
Weight17.8 kg each

Source: Q Acoustics – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Suits: Smaller tube and starter amps
  • Suits: Medium sized rooms
  • Suits: Who likes level reserve
  • Less suited: very small rooms
  • Less suited: if you want minimalist design
  • Less suited: Analytical chains with bright tuning

Vinyl BotPro Index: 50 (Starter 40–54) · Label: AI research · Sept 2026 · All information is provided without guarantee; prices change and manufacturer specifications may differ.