In-ear analysis · Master · as listed
Shure SE846 Gen 2 Analysis
The Shure SE846 Gen 2 sits in fifth place in the Master tier of the shortlist of 12 November 2026, with a Vinyl BotPro index of 91, and it does not carry a Sound or value badge. This analysis fills the previously missing product page, takes the list record of the list package, and documents the current shop price of €1,189.00.
In short
The Shure SE846 Gen 2 stands on the in-ear shortlist of 12 November 2026 in the Master tier at rank 7 with index 92. That figure is the list record of the list package of 12 November 2026 (the expanded twenty-one-model Master tier was remapped). It still carries no champion badge: Sound sits with the Sennheiser IE 900, Value with the 64 Audio Aspire 3. The previous short list entry only pointed to an overview; this page supplies the missing full AI analysis.
Shure introduced the second generation in 2022 as a development of the SE846 launched in 2013. The core remains a compact four-driver in-ear with balanced armatures, a three-way crossover and a patented low-pass acoustic path. What is new is chiefly the fourth, red Extended filter, fitted at the factory, which Shure says shapes the treble more deliberately between about 4 and 12 kHz. New Jade, Graphite and Clear shells complete the update. W. Jennings described the model for ecoustics in a substantial listening review (updated 17 September 2022) and places the Gen 2 among the best universal-fit in-ears in its class, with more bass definition, very fine midrange, improved imaging and a build aimed at a long life. Above 7.5 kHz the treble, in that review, recedes.
The official European price has moved relative to the list standing of 7 November 2026. The list quoted €1,129 for the UNI version in the Shure EU shop. On 12 November 2026 the same manufacturer shop for Germany and the Netherlands showed a recommended retail price of €1,189.00. The 2022 launch price was 899.95 US dollars. This analysis does not convert dollars into euros and does not set a new index. Updating the list price belongs in a later list package.
VinylCination has not listened to the SE846 Gen 2 and has not measured it. All listening judgements come from the international review named above, plus manufacturer data. On a vinyl system it is a low-impedance, strongly isolating wired in-ear with an MMCX connector that typical headphone outputs will drive easily, but which, as a multi-way design, can react to a high output impedance.
Technical data (public)
| Form | Wired in-ear, universal fit, closed, sound-isolating |
|---|---|
| Drivers | Four balanced armatures (two woofers, one mid, one tweeter), three-way crossover (manufacturer / review) |
| Special acoustics | Patented low-pass path, compared by the maker to a long ported route |
| Impedance | 9 Ω (Shure / list standing) |
| Sensitivity | 114 dB SPL/mW (Shure / list standing) |
| Cable | Detachable MMCX; 3.5 mm cable with memory wire, 6.35 mm adaptor and shirt clip in the box (review) |
| Filters | Four swappable sound filters: balanced (blue), warm (black), bright (white), extended (red, new, factory fit) |
| Finishes | Jade, Graphite, Clear (Gen 2) |
| Isolation | Shure: up to 37 dB (list standing); review with Comply foam: nearly 24 dB |
| Price standing | Launch 899.95 USD (2022); list 7 Nov 2026: Shure EU €1,129 (UNI); shop 12 Nov 2026: €1,189.00 (Shure DE/NL) |
Amplifier compatibility
At 9 ohms and 114 dB SPL/mW the SE846 Gen 2 is, on paper, very easy to drive. A typical headphone output on an integrated amplifier, a phono stage or a small converter will usually supply enough level, including for higher listening volumes. The data sheet does not demand a dedicated headphone amplifier. The live list still gives the drive subscore 8.4 and trims it because of the low impedance of a multi-way in-ear: such systems can react tonally to a high source output impedance, because the load changes with frequency.
For a vinyl system that means a modern, low-impedance output is the less critical partner. On older, higher-impedance outputs the balance of the driver ways can shift – not necessarily dramatically, but in the way that is generally known for low-impedance multi-way in-ears. The review itself does not describe the Gen 2 as a difficult special case, but as a professionally conceived earphone that also works on stage and on a player. An optional true-wireless adapter (Shure RMCE-TW2) turns the wired model into a wireless one; for a fixed wired phono chain that adapter is unnecessary and is not used here as a listening pillar.
The supplied MMCX cable ends in 3.5 mm, and a 6.35 mm adapter is included. That covers both the small jack of typical phono stages and the large jack of some integrated amplifiers. Memory-wire hooks take the cable over the ear; the review calls them durable, if not the tightest. Cable noise and length are treated as ordinary, not as a central criticism.
Rating criteria in detail
The live list’s subscores stand here only as list standing. Sound-data 7.8: a substantial international listening review that places the Gen 2 among the best universal in-ears, describes more bass definition and improved imaging, and also records the treble fall above 7.5 kHz. Build/comfort 8.6: “rather exceptional”, long-lived, four filters, MMCX, very compact, high stated isolation. Drive 8.4: easy to power, a trim for the low-impedance multi-way load. Value 6.6: already a high launch price in 2022, and in euro dearer than the Monarch MKIV in the same tier. Weighted raw score 7.7, mapped to Master index 92 in the list package of 12 November 2026.
Manufacturer and concept
Shure is a US company with a long history in microphones and stage technology. The first-generation SE846 appeared in 2013 and remained in the range for an unusually long time. The review turns exactly that into an argument: many headphones are replaced after a few years, whereas the SE846 took durability, fit and isolation seriously enough to stay in the ears of musicians and demanding listeners for more than a decade. The second generation changes little in that promise and mainly adds the Extended filter and new shells.
Product manager Sean Sullivan, speaking to ecoustics in a podcast, describes the first generation’s filter history: first a bright filter that sounded harsh on part of the repertoire, then a warm filter that veiled other music, and, shortly before launch, a balanced filter as the factory setting. The fourth, red filter of Gen 2 answers, according to Shure, customer requests for more treble reach and clearer imaging. That Extended filter is fitted at the factory. The review says it also fits the first generation; whether Shure would sell it separately for the long term was left open in 2022.
The shell stays deliberately compact. Jade and Graphite combine an anodised aluminium outer shell with a clear inner body through which the drivers are visible; Clear remains transparent. The review describes a metal block into which the nozzle plate is screwed, rather than relying on plastic alone. That is typical Shure: more tool than jewel, designed for years, not for a season. The optional wireless adapter and backward-compatible accessories underline the same idea. This analysis concerns the wired model, not the wireless variant.
How the technology works
Four balanced-armature drivers share the work: two for the low bass, one for the midrange, one for the treble, joined by a three-way crossover. Shure does not name the exact driver types. The most distinctive acoustic trick is the patented low-pass path, which the review compares to a long ported route – in the author’s vivid wording a path on the order of four feet, folded into the compact shell, decoupling the low bass like a damped reflex. The aim is controlled, unbloated low end in a very small body.
The swappable filters sit as nozzles on the sound path. A tool is included; the review says a change takes a few minutes and should be done with that tool. The colour codes are only for recognition: blue balanced, black warm, white bright, red Extended. Because the nozzle is long and narrow, tips from other brands often will not fit; Shure and Comply offer matching replacements. According to the review the box holds six tip types, twelve pairs in all, plus a case, spare filters in a tube, the cable, an adapter and a clip.
The MMCX connector sits on top of the shell and is unchanged from the first generation. The supplied cable has memory wire and a heavy, durable jacket. Anyone who later swaps the cable stays in Shure’s accessory world or uses MMCX leads from other makers; this analysis does not claim a sound gain from third-party cables. Internally Shure stresses its own tuning, not a driver parade. At a Master-tier price that is a conservative, professional approach: less spectacle, more serviceability over years.
What the international specialist press hears
Character
W. Jennings knows the first generation from long personal use and compares the Gen 2 directly with it and with other high-end in-ears. With the Extended filter already fitted he describes more impact and, above all, more definition, speed and texture in the low bass. The impact matches his older pair, but the drawing is clearer. Mid-bass stays quick and firm and does not follow the fashion of lifting the bass until it bleeds into the lower midrange. Big hits are felt; in quiet passages the bass steps back. A roll-off near 30 Hz is the author’s orientation from his impression, not a manufacturer specification.
Tonal balance
The first generation’s midrange was already very good, according to the review; the Gen 2 does not depart from that. Lower mids are detailed, male voices have weight and convincing timbre, guitars a recognizable edge and a moderate decay. With the Extended filter the midrange moves slightly forward, because there is more energy between about 1 and 4 kHz: violins and female voices gain presence and transparency, but also stand further forward in the mix. For everyday listening the author prefers this filter; for concentrated listening he still prefers the balanced (blue) filter.
The lower treble is also slightly lifted, with more perceived detail and a snappier attack. Above 7.5 kHz the response falls back; that, the review says, keeps the sound from harshness and fatigue. A measurement by the author suggests the fall only beyond his hearing limit around 14.5 kHz. The live list takes exactly that treble recession into its one-line summary.
Dynamics, bass and stage
For a closed in-ear the review describes the stage as good, with impressive depth and more width and height than before. Instrument separation is above average. Imaging, above all, has improved: the “donut” hole of the first generation, in which events seemed to vanish as they moved across the stage, has been filled. That is one of the few points on which the Gen 2 is more than the first generation plus a new filter.
Strengths
The text praises durability, hours-long comfort, isolation with foam, the filter concept and a build the author calls “rather exceptional.” He finds the 899 US dollar launch price understandable in a market where custom in-ears can cost several times as much, and asks why other high-end in-ears are so expensive if the SE846 lasts this long.
Fit, isolation and partners
Fit has always been central for Shure, because the earphone has to work for hours and on stage. With Comply foam the review cites nearly 24 dB of isolation – less than some customs at 30 dB, but enough for the stage. The list quotes Shure at up to 37 dB. The difference is a matter of method and tips; both figures describe high passive isolation, not active counter-sound. In the living room that means ambient noise stays further out, and the listening level can stay moderate. The partner at the amplifier should, as above, preferably have a low output impedance.
Agreement and gaps
The pillar of this analysis is the substantial ecoustics listening review already cited on the live list. Additional traditional magazine tests of the exact Gen 2 model were not used as a second pillar for this page. Under the single eligibility rule, ecoustics is an independent online specialist magazine and the model is eligible; it still receives no badge because neither its value subscore nor its remaining sound evidence leads the tier. A later Sound or Value badge in the Master tier would, under the single rule, need a solid specialist pillar for the exact model; this analysis does not award the SE846 Gen 2 such a badge and does not move the existing titles.
Research consensus
Manufacturer data and the listening review form a clear picture. The SE846 Gen 2 is a compact, very solidly built four-driver in-ear with four filters, an MMCX cable and high passive isolation, conceived for a long service life rather than a short model cycle. Tonally it stays in the Shure line: controlled bass, very fine midrange, more air and imaging with the Extended filter, and a receding uppermost treble. It is easy to drive, but as a multi-way system not wholly insensitive to output impedance. In euro it sits in the Master tier, and the manufacturer price in the EU shop on 12 November 2026 was higher than the list standing of 7 November. Those sentences are a consensus of the sources in hand, not an in-house listening judgement.
Features and daily use
The review describes a generous kit: a case, four filters plus a tool and spares in a tube, a 3.5 mm cable with a clip, a 6.35 mm adapter, six tip types (twelve pairs) and paperwork. That is the kit meant to support long use, not a minimum pack. The nozzles are manufacturer-specific; anyone swapping tips stays in the Shure or Comply range. The official packshot on this page shows the clear finish with visible drivers and the red Extended filter – exactly the factory signature of the second generation, for orientation, not as the only finish sold.
In daily use the over-ear fit and the seal matter. The review reports a shell that could even be lent out because it fitted so many ears – a stage argument that, in the living room, reads as a hint of an uncomplicated fit. The memory-wire hooks could sit tighter, the author says, but they are usable and durable. Anyone who uses the in-ear only at the system can do without the wireless adapter and without a microphone cable; neither is part of the standard wired model described here.
Price and availability
In 2022 Shure launched the Gen 2 at 899.95 US dollars. The shortlist recorded an official Shure euro price of €1,129 for the UNI version on 7 November 2026. On 12 November 2026 the Shure shops for Germany and the Netherlands showed a recommended retail price of €1,189.00. This analysis records both standings and does not convert the dollar price. Whether individual finishes or the UNI cable version are temporarily reduced in the shop can change; the current manufacturer price is the binding figure.
In the list’s Master tier the Gen 2 therefore sits above the “from about €600” frame and, in euro, above the Monarch MKIV (€1,011 at Linsoul EU, list standing). That is exactly why the list’s value subscore is lower. The model is available from the manufacturer shop and from specialist dealers; it is a current model, not a discontinued one. The optional true-wireless adapter is sold separately and is not part of the UNI price named here.
At the amplifier and on a vinyl system
On a phono chain the SE846 Gen 2 hangs, like any wired in-ear, from the jack after the phono stage. The low impedance does not demand unusual current, but it does want a well-designed output. An integrated amplifier with a modern headphone stage, or a small converter after the phono stage, is typically enough. A high-impedance older output can shift the four driver ways; if in doubt, stay with a source that has a low output impedance.
The high passive isolation is a practical advantage at the system when the room is not quiet: street, fridge, conversation in an adjoining room stay further out than with the light Starter in-ears on the list. The earphone also isolates the other way; anyone who wants to listen quietly in a flat can keep the level moderate. The Extended filter, according to the review, brings more air and imaging; the balanced filter remains the calmer choice for concentrated listening – for a dense orchestral record, or a voice that should not be pushed forward.
The supplied cable with a 3.5 mm plug and a 6.35 mm adapter covers the usual sockets. Memory wire and a shirt clip keep the cable off the body; that reduces the cable noise that otherwise becomes annoying quickly with in-ears at a system. The review does not treat extreme sitting distance from a sideboard as a problem of the standard cable, but anyone who sits far from the amplifier should plan an extension. The wireless adapter is no gain for this use: it breaks exactly the simple wired path that a vinyl chain otherwise offers.
Who is the SE846 Gen 2 for?
The Gen 2 suits listeners who want a long-lived, compact four-driver in-ear with high isolation and a swappable tuning, and who accept the Master price. It fits a vinyl system that already has a decent headphone output, and people who also want to use the same earphone on the move or on stage. It fits less well if you want an airy, wide-open treble without the described roll-off, if you want a showy jewel-like shell, or if in this price class you prefer the cheaper-in-euro Monarch MKIV as the value choice on the list. Anyone who mainly wants maximum sound-data without filter play will find the tier’s sound champion in the Sennheiser IE 900, a single-driver concept with a different philosophy.
How it compares
Inside the expanded list (list record 12 November 2026, eighteen Master models) the comparison is the decisive placement. The SE846 Gen 2 sits at rank 7 with index 92 and carries no badge. The Meze Advar leads the tier and holds the value badge. The THIEAUDIO Monarch MKIV (index 89, no badge) is a tribrid with a sound switch and an aluminium shell, cheaper in euro (€1,011 at Linsoul EU, list standing), with a large shell and simpler accessories. The Sennheiser IE 900 (index 86, Sound) is a single-driver flagship that its own analysis describes as clear, open and detailed, and also as source-critical, with a cable that can transmit noise; the EU shop price was higher than Shure’s. Those contrasts – filters and isolation at Shure, a switch and a high driver count at THIEAUDIO, a single driver and a more open treble at Sennheiser – are already in the list’s short texts. This page does not set new index figures.
Against the first SE846 generation the review sees mainly the Extended filter, the improved imaging and the new shells. Anyone who already owns an older SE846 with a later red filter is, according to reader notes in the same text, tonally close to the Gen 2, but does not automatically get every other internal detail the author describes in the imaging “donut.” Buying “only for the colour” would, on this review, be too little; buying for the filter, the imaging and continued service is the line of the text.
FAQ
What exactly is the Shure SE846 Gen 2?
The second generation of Shure’s wired four-driver in-ear with balanced-armature drivers, a low-pass acoustic path and four interchangeable sound filters, including the new Extended filter (red). It is a universal-fit model sold in several finishes.
Does the SE846 Gen 2 need a headphone amplifier?
According to the manufacturer it is easy to drive at 9 ohms and 114 dB SPL/mW. The live list still trims the drive score because a low-impedance multi-way in-ear can react to a high output impedance. A dedicated amplifier is usually unnecessary; a low-impedance output is preferable.
Is it suitable for listening to records?
Yes. As a wired in-ear with MMCX and a 3.5 mm cable it can be connected to a typical phono chain with a headphone output. The review stresses isolation, long wearing time and swappable filters, which helps in a room that is not perfectly quiet. Shure also offers an optional true-wireless adapter, which is unnecessary on a fixed wired vinyl system.
What does the SE846 Gen 2 cost in the EU?
The shortlist quoted a Shure EU price of €1,129 for the UNI version on 7 November 2026. On 12 November 2026 the official Shure shops for Germany and the Netherlands showed a recommended retail price of €1,189.00. The 2022 launch price was 899.95 US dollars. Prices change; please check the current shop.
Is the SE846 Gen 2 a champion on the shortlist?
No. It sits in the Master tier at rank 7 with index 92 and carries neither the Sound nor the Value badge. Those sit with the Sennheiser IE 900 (Sound) and the Meze Advar (Value). This analysis takes the list record of the list package of 12 November 2026.
Does this page rest on a listening test by the VinylCination team?
No. There was no in-house listening test and no measurement of our own. The assessment draws on Shure’s manufacturer data and the international listening review by ecoustics (W. Jennings, updated 17 September 2022).
Conclusion
The Shure SE846 Gen 2 remains without a champion badge in the Master tier (list record 12 November 2026: rank 11, index 93). The full analysis confirms the list’s picture: a compact, very durably built four-driver with four filters, high isolation, easy drive and a listening review that describes more bass definition and cleaner imaging, while also recording the receding uppermost treble. The current manufacturer price in the EU shop sits above the list standing of 7 November 2026; a list update will follow separately. Anyone looking for longevity, isolation and a swappable tuning will find a clearly documented Master model here. Anyone who wants air in the top treble, or a lower euro price in the same tier, stays with the neighbours that already have full analyses.
About this AI analysis
This section is an AI summary of a published international listening review and of manufacturer data from Shure. Vinyl BotPro places the findings and links them to the data sheet, the list standing and comparison models; VinylCination does not carry out its own listening tests or measurements, and all sources are linked at the end of the page. Prices and availability change (as of 12 November 2026, without guarantee). Index 92 is the list record of the list package of 12 November 2026. The euro price in the manufacturer shop on 12 November 2026 was €1,189.00 and therefore differs from the list standing of €1,129 (7 November 2026).
Sources
- Shure Germany — SE846 Gen 2 (manufacturer, price as of 12 November 2026: €1,189.00)
- Shure — SE846 Gen 2 (international product page)
- Shure Nederland — SE846 UNI Gen 2 (€1,189.00, 12 November 2026)
- ecoustics — Shure SE846 Gen 2 Sound Isolating Earphones: Exclusive Review (W. Jennings, updated 17 September 2022)
- VinylCination — Best in-ear headphones (list record 12 November 2026: index 92, ecoustics / Shure)