Floorstanding speaker · AI analysis · Expert, rank 8
Sonus Faber Sonetto III G2 Review
AI analysis (research): The smallest floorstander in the second Sonetto generation from Sonus faber; based on manufacturer data and Hi-Fi+.

Summary
The Sonetto III G2 (approx. 4,900 € per pair) is the smallest floorstander in the second Sonetto generation. A 28 mm DAD Arrow Point tweeter works with a 165 mm midwoofer and a woofer of the same size. The woofer fires downwards into the concrete plinth. Sonus faber specifies 88 dB and 4 Ω.
Specs (public / manufacturer)
| Type | 2.5-way floorstanding speaker · midwoofer rear-ported · woofer down-firing port |
|---|---|
| Chassis | 28 mm DAD Arrow Point tweeter (copper ring) · 165 mm midwoofer · 165 mm woofer (each with aluminium ring) |
| Frequency response / separation | 38 Hz–40 kHz · 2,700 Hz |
| Sensitivity / Impedance | 88 dB (2.83 V/1 m) · 4 Ω |
| Amplifier power | 50–280 W |
| Enclosure | Lute shape · walnut or wenge veneer, black high gloss · concrete plinth |
| Dimensions / weight | 1,068 × 287 × 350 mm (H × B × T) · 25.8 kg/piece |
Manufacturer specifications (Sonus faber)
| Type | 2.5-way floorstanding speaker · mid/woofer rear-vented · woofer down-vented |
|---|---|
| Drivers | 28 mm (1.1") DAD Arrow Point tweeter with copper shorting ring · 1 × 165 mm mid/woofer · 1 × 165 mm woofer (each with aluminium demodulation ring) |
| Crossover frequency | 2,700 Hz |
| Frequency response | 38 Hz–40 kHz |
| Sensitivity | 88 dB SPL (2.83 V/1 m) |
| Impedance | 4 Ω nominal |
| Recommended amplifier power | 50–280 W |
| Dimensions | 1,068 × 287 × 350 mm (H × W × D) |
| Weight | 25.8 kg each |
| Enclosure | lute shape · wood, leather, concrete |
Source: Sonus faber – official specifications · As of 16 October 2026 · subject to change by the manufacturer
Matching tips
- Good fit: Amplifiers from about 50 W, stable into 4 Ω
- Good fit: Small to medium-sized living rooms
- Good fit: Listeners who value design and build quality
- Less suited: Low-powered amplifiers
- Less suited: Listeners seeking maximum impact with large orchestras
Technology in detail
The Sonetto III G2 is a 2.5-way speaker: midwoofer and woofer (165 mm each) both handle bass, but only the midwoofer extends into the midrange. The tweeter and midwoofer sit in their own enclosure section with a rear-facing bass reflex port. The woofer fires downwards through an opening into the plinth.
The 28 mm DAD Arrow Point tweeter has a copper ring against distortion, and the two larger drivers each have an aluminium ring. Their cones carry the flower pattern that Sonus faber first introduced in its flagship Suprema. The crossover point is 2,700 Hz.
Sonus faber specifies 38 Hz to 40 kHz, 88 dB sensitivity and 4 Ω; 50 to 280 W is recommended. The lute-shaped cabinet comes in walnut, wenge or black high gloss. The speaker measures 1,068 × 287 × 350 mm and weighs 25.8 kg.
What the specialist press says
One review describes the Sonetto III G2 as balanced, insightful and thoroughly musical, with deep, controlled bass and a strong midrange; build and finish rival any competitor.
Who is it for?
For vinyl listeners looking for a handsomely built floorstander with a balanced, musical sound for the living room.
What makes this AI analysis special
This AI analysis combines Sonus faber's specifications with the review in international magazines. All measurements are manufacturer specifications. As of October 2026.
How the score comes about
The index reflects the 2.5-way design with DAD tweeter, the concrete plinth, the high build quality and the very positive review in international magazines. The Vinyl BotPro Index on this page remains 77 (Expert, rank 8) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology
Sources
Vinyl BotPro Index: 77 (Expert 70–84) · Label: AI research · Sept 2026