Compatibility · Oct 2026
Ortofon 2M Black on the Pro-Ject RPM 5 Carbon: does it fit?
We worked through the tonearm of the Pro-Ject RPM 5 Carbon (Pro-Ject 9 EVO Carbon, 8 g effective mass) and the cartridge Ortofon 2M Black (7.2 g) with the calculation method of our Advisor. Result: fits, calculated resonance 8.4 Hz. Orientation only; check the manufacturer’s specifications; errors excepted.
Verdict: fits
Fits according to our calculation. All three checks (mounting, resonance, counterweight) pass.
- Resonance: 8.4 Hz
- Moving mass: 16.2 g
- Compliance: 22 µm/mN at 10 Hz
- Cartridge: 7.2 g
A typical upgrade pairing in the upper price range. The RPM 5 Carbon has a one-piece 9-inch carbon arm with 8 g effective mass and four counterweights in the box, together covering cartridges from 5 to 14 g. The 2M Black (7.2 g, 22 µm/mN) lies in that range and reaches about 8.4 Hz. Pro-Ject offers the RPM 5 Carbon with or without an Ortofon 2M Silver, so the cartridge is not permanently fitted.
The calculation in detail
Three points decide whether a cartridge fits a tonearm: the mounting, the resonance of arm and cartridge, and the counterweight. The overall verdict is as strict as the weakest point.
-
Mountingfits
The cartridge has the usual half-inch mounting (two screws, hole spacing ½ inch), and the arm’s headshell is designed for it.
Advisor output: Fixed headshell with half-inch mounting holes (manufacturer: cartridges with a half-inch mount fit).
-
Resonancefits
The calculated resonance of 8.4 Hz lies in the target zone of 8–12 Hz.
Advisor output: fᵣ ≈ 8.4 Hz by 159 / √(16.2 × 22); target 8–12 Hz, warning outside 7–14 Hz. Mass 8 g arm + 7.2 g cartridge + 1 g screws = 16.2 g; compliance 22 µm/mN (10 Hz, per data sheet). Calculation note, not a measurement.
-
Counterweightfits
The arm’s counterweight covers the cartridge: 7.2 g lies within the range 5–14 g.
Advisor output: Cartridge 7.2 g is within the range 5–14 g (cartridge weight (Pro-Ject: four counterweights supplied, 5–7.5 / 7–10 / 9–11 / 10–14 g)).
How the resonance comes about
- Moving mass: 8 g arm + 7.2 g cartridge + 1 g screws = 16.2 g.
- Compliance at 10 Hz: The compliance of 22 µm/mN is specified at 10 Hz and is used unchanged.
- Formula: fᵣ = 159 / √(mass × compliance) = 159 / √(16.2 × 22) = 159 / √356.4 ≈ 8.4 Hz.
The input data
Tonearm: Pro-Ject 9 EVO Carbon (Pro-Ject RPM 5 Carbon)
- Effective mass
- 8 g · manufacturer figure, source: project-audio.com
- Mounting
- fixed headshell with half-inch mount
- Counterweight
- 5–14 g · cartridge weight (Pro-Ject: four counterweights supplied, 5–7.5 / 7–10 / 9–11 / 10–14 g)
Cartridge: Ortofon 2M Black
- Type
- MM · Nude Shibata r/R 6/50 µm · alloy cantilever
- Weight
- 7.2 g
- Compliance
- 22 µm/mN at 10 Hz
- Tracking force
- 1.4–1.7 g · recommended 1.5 g
- Output voltage
- 5 mV
- Market price
- about €480–600 (prices without guarantee, Oct 2026)
In our data there is no fixed factory cartridge documented for the Pro-Ject RPM 5 Carbon (manufacturer: available with or without an Ortofon 2M Silver (MM)). The calculation applies to a cartridge of your own choice.
What this means for you
- Set the tracking force as specified by the manufacturer (1.4–1.7 g · recommended 1.5 g) and check it with a gauge.
- Set the overhang with the alignment protractor, then the anti-skating.
- Compare the manufacturer’s specifications for arm and cartridge before you order or mount.
The Ortofon 2M Black is a moving-magnet cartridge (5 mV) and works on a normal MM phono input. If the Pro-Ject RPM 5 Carbon has no built-in phono stage or the amplifier has no phono input, the top list of phono preamps helps.
Alternatives
Our tip: On the Technics SL-1200GR2 the same cartridge lands at 8.3 Hz; the arm brings 8.5 g there and has a removable headshell.
More cartridges on the Pro-Ject RPM 5 Carbon
If you would like to compare: these cartridges also pass all three checks on the Pro-Ject RPM 5 Carbon and cost roughly the same according to our test pages (prices without guarantee):
- Ortofon Quintet Blue: calculated resonance 9.7 Hz, 9 g, about €480–550
- Nagaoka MP-200: calculated resonance 11.2 Hz, 6.5 g, about €400–480
- Audio-Technica AT-OC9XEN: calculated resonance 9.7 Hz, 7.6 g, about €280–370
- Sumiko Moonstone: calculated resonance 8.7 Hz, 6.6 g, about €300–390
The Ortofon 2M Black on other turntables
On these turntables the Ortofon 2M Black passes all three checks according to the calculation:
- Technics SL-1200GR2: calculated resonance 8.3 Hz, arm 8.5 g
- Pro-Ject T2 W: calculated resonance 8.1 Hz, arm 9.5 g
- Pro-Ject X8 Evolution: calculated resonance 8.3 Hz, arm 8.5 g
- Pro-Ject Debut Carbon EVO: calculated resonance 9 Hz, arm 6 g
Method in brief
- Procedure
- As in the Advisor: resonance fᵣ = 159 / √(mass × compliance), target 8–12 Hz, warning outside 7–14 Hz. Mass = arm mass + cartridge weight + 1 g screws. 100 Hz values are converted with 1.5–2.2.
- Verdict rule
- One point outside: “does not fit”. Mounting or resonance not verifiable: “not verifiable”. One point at the edge: “borderline”. Otherwise “fits”.
- Data
- Advisor data of 2 Oct 2026, page of 3 Oct 2026
- Limits
- No measurement, no guarantee. Orientation only; check the manufacturer’s specifications; errors excepted.
Frequently asked questions
Does the Ortofon 2M Black fit the Pro-Ject RPM 5 Carbon?
Yes, according to our calculation the Ortofon 2M Black fits the Pro-Ject RPM 5 Carbon: mounting, resonance and counterweight pass. Calculated resonance: 8.4 Hz. Orientation only; check the manufacturer’s specifications; errors excepted.
How high is the resonance of the Ortofon 2M Black and the Pro-Ject RPM 5 Carbon?
About 8.4 Hz. The calculation uses 159 / √(mass × compliance): 16.2 g moving mass (arm 8 g, cartridge 7.2 g, screws 1 g) and 22 µm/mN at 10 Hz. The target zone is 8–12 Hz; a warning applies outside 7–14 Hz.
Is the counterweight of the Pro-Ject RPM 5 Carbon sufficient for the Ortofon 2M Black?
The arm’s counterweight covers the cartridge: 7.2 g lies within the range 5–14 g.
What phono input does the Ortofon 2M Black need?
The Ortofon 2M Black is a moving-magnet cartridge (5 mV) and works on a normal MM phono input. If the Pro-Ject RPM 5 Carbon has no built-in phono stage or the amplifier has no phono input, the top list of phono preamps helps.
How reliable is this calculation?
It is an orientation, not a measurement. The arm mass comes from a manufacturer figure, the compliance from the manufacturer’s data sheet. Data as of 2 Oct 2026. Check the manufacturer’s specifications; errors excepted.
Orientation only; check the manufacturer’s specifications; errors excepted. Calculation by the AI Vinyl BotPro based on manufacturer data, without listening test and without measurement, not purchase advice in the legal sense. Notices & liability
Updated 3 Oct 2026 · Advisor data 2 Oct 2026 · Prices without guarantee, Oct 2026