Turntable · Short analysis · Premium, rank 28

Pro-Ject Automat A2 Review

Short analysis (research): Pro-Ject Automat A2 — automatic sub-chassis turntable with Ortofon 2M Red and 33/45/78 rpm.

AI research Premium Short analysis Rank 28 in Premium Automatic Price as of Oct 2026
Pro-Ject Automat A2 review, turntable
Photo: manufacturer Pro-Ject · product photo for illustration only.
Pro-Ject Automat A2 (2/4) — manufacturer photo
Photo: manufacturer Pro-Ject · additional product photo.
Pro-Ject Automat A2 (3/4) — manufacturer photo
Photo: manufacturer Pro-Ject · additional product photo.
Pro-Ject Automat A2 (4/4) — manufacturer photo
Photo: manufacturer Pro-Ject · additional product photo.

Summary

The Automat A2 takes automatic operation into the Premium band: sub-chassis, hand-painted MDF main chassis, die-cast aluminium cover for the automatics, gimbal-type 4-point tonearm bearing and Ortofon 2M Red fitted at the factory (manufacturer). New compared with the A1: 78 rpm for shellac and a selectable set-down point for 7″ or 12″ at 45 rpm. One review calls it possibly the best automatic turntable the reviewer has tested; the international specialist press praises the easy operation and the balanced, well-defined sound, but rates manual decks such as the Rega Planar 3 or Pro-Ject X2 ahead on sound.

Specs (public / manufacturer)

DriveBelt · automatic · 33/45/78 electronic (manufacturer)
ChassisSub-chassis · MDF main chassis · die-cast aluminium cover for the automatics
Tonearm8.3″ ULM aluminium · 211 mm · 7 g effective mass · gimbal-type 4-point bearing
CartridgesOrtofon 2M Red, factory-adjusted (US version: Sumiko Rainier)
PhonoNot built in: phono input or phono preamp required
Wow and flutter±0.14 % at 33 rpm (manufacturer)
Price guideapprox. €1,100–1,200 · UVP €1,199 · Okt. 2026
Manufacturer specifications (Pro-Ject)
Manufacturer data sheet
Drivebelt drive, automatic
Speeds33/45/78 rpm (electronic speed change)
Platterdamped aluminium platter
Wow & flutter33: ±0.14% · 45: ±0.12%
Speed drift33: ±0.27% · 45: ±0.22%
Signal-to-noise ratio74 dB
Tonearm8.3″ ultra-light-mass aluminium · 211 mm · 7 g effective mass · 19.5 mm overhang
Cartridge (fitted)Ortofon 2M Red
Power consumption1.5 W (15 V DC / 0.8 A power supply)
Dimensions430 × 150 × 365 mm (W × H × D)
Weight7.3 kg net / 10 kg packed

Source: Pro-Ject – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Plan for a phono preamp: phono preamp top list
  • Stylus upgrade within the 2M range, for example to the 2M Blue stylus
  • Tonearm height is fixed: choose cartridges with a similar build height to the 2M Red

Why (guidance only)

Automatic operation with sub-chassis, gimbal bearing and 78 rpm.

Vinyl BotPro Index

58 out of 100 · Premium tier · Prices change, check the market price before buying.

Short analysis by Vinyl BotPro (AI) · as of Oct. 2026 · Corrections: see the legal notice (German)

Manufacturer and concept

Pro-Ject Audio Systems is an Austrian manufacturer that has built turntables since 1991 and is now one of the largest makers worldwide. With its Automat series, Pro-Ject has brought full automation back into the more ambitious hi-fi class. The Automat A2 is built in the former Dual factory, and the family resemblance to later Dual decks is clear in the design.

The A2 is the larger model above the Automat A1. It combines the convenience of an automatic turntable with technology usually found on mid-range manual decks: a subchassis, a gimbal-bearing tonearm and a factory-aligned Ortofon 2M Red. There is no built-in phono preamp. Pro-Ject is targeting listeners who already own an amplifier with a good phono input or a separate phono stage.

The technology explained

Subchassis against vibration

On the A2, platter bearing, tonearm and motor sit on a floating subchassis inside a heavy, hand-painted MDF main chassis. The subchassis isolates the sensitive parts from footfall and cabinet vibration. This matters especially with automatic turntables, because the auto mechanism adds extra parts inside the plinth. According to Pro-Ject, the automation cover is die-cast aluminium.

Gimbal-bearing tonearm

According to Pro-Ject, the 8.3-inch aluminium tonearm has an effective length of 211 mm, an effective mass of 7 g and an overhang of 19.5 mm. It runs in a four-point gimbal bearing with steel tips, which Pro-Ject makes in-house. A gimbal bearing allows movement in two axes with very low friction, so the stylus can follow the groove easily. The low effective mass suits compliant MM cartridges like the 2M Red.

Drive and speeds

A belt drives the damped aluminium platter. Speeds of 33⅓, 45 and 78 rpm are selected electronically. Pro-Ject quotes wow and flutter of ±0.14% at 33 rpm and ±0.12% at 45 rpm, speed deviation of ±0.27% and ±0.22% respectively, and a signal-to-noise ratio of 74 dB. New compared with the A1 are 78 rpm for shellac records and a selector for the lead-in point of 7-inch or 12-inch records.

Cartridge

An Ortofon 2M Red is fitted and aligned at the factory; in the USA, Pro-Ject supplies a Sumiko Rainier instead. The 2M Red is one of the best-known MM cartridges and can be upgraded by swapping in the 2M Blue stylus. Shellac records need a separate stylus with a larger tip radius; 78s should not be played with the standard stylus.

Dimensions and accessories

According to Pro-Ject, the A2 measures 430 × 150 × 365 mm and weighs 7.3 kg. The power supply delivers 15 V DC, and power consumption is 1.5 W. The box includes a dust cover, a 45 rpm adapter and Pro-Ject RCA cables with an integrated ground wire. The rear panel carries only RCA sockets, a ground screw and the power socket.

Sound according to international reviews

The international specialist press tested the A2 with the Sumiko Rainier supplied in the USA. The reviewer describes a broad, deep soundstage, crisp brass, silky strings and precise, forceful piano and drums with no sign of strain. He particularly highlights the sense of rhythm. The automation works almost silently with no apparent drag on the motor, and the cue lift lowers the arm very gently. His conclusion: very possibly the best automatic turntable he has reviewed.

In a direct comparison with a similarly priced manual deck fitted with an Ortofon 2M Blue, the reviewer found the A2 level in the midrange but slightly behind at the frequency extremes: a little less heft in the bass and a little less sparkle in the treble. That was partly down to the cartridge. One review also praises the easy operation and balanced sound. We did not carry out our own listening or measurement tests; this assessment is based on these sources and the manufacturer's data.

Automatic turntables then and now

For a long time, hi-fi fans saw automatic turntables as a compromise. The criticism: the auto mechanism drags on the tonearm and worsens tracking. One reviewer recalls that Dual automatics used to draw raised eyebrows. He himself only noticed any drag when the mechanism engaged, not while the record was playing. With the A2, he found no apparent drag at all.

Modern designs like the A2 separate mechanism and tonearm cleanly during playback. They also add features once reserved for manual decks, such as the subchassis and gimbal bearing. As a result, the line between a convenient automatic and a serious hi-fi turntable is increasingly blurred.

Playing shellac records

Shellac records were made at around 78 rpm until the 1950s. Their grooves are much wider than on vinyl. A normal stylus sits too deep in them, produces heavy noise and can damage the record. That is why 78s need their own stylus with a larger radius. Ortofon offers suitable styli for the 2M system; before switching, check that it fits your cartridge body and adjust the tracking force. Because shellac is brittle, handle the records with care and do not clean them with alcohol-based products, as alcohol attacks shellac.

Setup

Setup is simple but needs some care. First remove two red transport locks on the drive and tonearm. Then loop the flat belt around the sub-platter and motor pulley, fit the platter until it clicks onto the spindle, and add the felt mat. Next, mount the counterweight, balance the arm and set the tracking force; set anti-skate to the same value. For the 2M Red, Ortofon recommends 1.8 g. Finally, connect the RCA cables and ground wire.

Plan for a phono stage

Because the A2 has no built-in phono preamp, it needs an amplifier with an MM phono input or a separate phono stage. Many good integrated amplifiers have a decent phono input. Otherwise, external MM phono stages from the Starter and Premium tiers of our best phono preamps list are a good fit. If you play 78 rpm shellac, a phono stage with selectable EQ curves helps, because many old shellac records were not cut to the RIAA standard.

Upgrade paths

The easiest upgrade is to swap the 2M Red stylus for the 2M Blue stylus. The cartridge body stays mounted, so alignment and overhang do not change. According to Pro-Ject, the tonearm height is fixed; if you want to fit a completely different cartridge, choose one with a similar body height to the 2M Red so the arm runs parallel to the record. More on these cartridges in our reviews of the Ortofon 2M Red and Ortofon 2M Blue.

Placement

The subchassis makes the A2 less sensitive to footfall than simple automatics. Even so, it should stand on stable, level furniture away from the speakers. Check the platter with a spirit level. Always connect the ground wire to avoid hum. Keep the dust cover closed while listening so no dust settles on record and stylus.

Strengths and limits at a glance

Who it suits

The A2 suits listeners who value the convenience of an automatic turntable but do not want entry-level sound. It also suits collectors with shellac records. It is less suited to buyers without a phono input and to tinkerers who want to try many different cartridges.

Compared with alternatives

All models are listed with index and price in our best automatic turntables list.

More questions about the Pro-Ject Automat A2

Does the A2 have a built-in phono preamp?

No. It needs a phono input on the amplifier or a separate phono stage.

Can I play shellac records?

Yes, the A2 runs at 78 rpm. You need a suitable 78 stylus; the standard 2M Red stylus is not meant for it.

Is the upgrade to the 2M Blue stylus worth it?

Yes, it is the easiest route to more resolution without realigning the cartridge.

Where is the A2 built?

In the former Dual factory.

Does the automation drag on the tonearm?

Not noticeably,: the mechanism only acts at the start and end and runs almost silently.

Do I need the ground wire?

Yes. The supplied RCA cables have an integrated ground wire that goes to the ground terminal of the amplifier or phono stage. Without it, you may get hum.

How sensitive is the A2 to footfall?

Thanks to the subchassis, less so than simple automatics. A stable location is still important.

Verdict

The Pro-Ject Automat A2 shows how far automatic turntables have come: subchassis, gimbal bearing, 78 rpm and a factory-aligned 2M Red make it a serious hi-fi turntable with added convenience. The press praises its steady, smooth sound and gentle mechanism. If you own a phono stage and no longer want to move the arm by hand, this is one of the best automatic turntables in the Premium tier. The price is justified mainly by subchassis, tonearm and cartridge, not by the automation alone.

Sources