Turntable · Short analysis · Starter, rank 21

Thorens TD 101 A Review

Short analysis (research): Thorens TD 101 A — automatic belt drive with phono and Audio-Technica AT3600.

AI research Starter Short analysis Rank 21 in Starter Automatic Price as of Oct 2026
Thorens TD 101 A review, turntable
Photo: manufacturer Thorens · product photo for illustration only.
Thorens TD 101 A (2/4) — manufacturer photo
Photo: manufacturer Thorens · additional product photo.
Thorens TD 101 A (3/4) — manufacturer photo
Photo: manufacturer Thorens · additional product photo.
Thorens TD 101 A (4/4) — manufacturer photo
Photo: manufacturer Thorens · additional product photo.

Summary

The TD 101 A is Thorens’ entry into automatic turntables: internal belt drive with an electronically controlled DC motor, 12″ die-cast aluminium platter, Audio-Technica AT3600 fitted at the factory and switchable MM phono (manufacturer). Set it up, connect it, press start: ideal for anyone who wants Thorens design without any setup effort. Its bigger brother, the TD 102 A, is listed in Premium.

Specs (public / manufacturer)

DriveInternal belt · automatic · DC motor, electronically controlled (manufacturer)
Platter12″ die-cast aluminium
CartridgesAudio-Technica AT3600 (manufacturer)
PhonoBuilt in, MM, switchable
Shut-offAutomatic
Price guideapprox. €400–550 · UVP €549 · Okt. 2026
Manufacturer specifications (Thorens)
Manufacturer data sheet
TypeAutomatic turntable with phono preamp (auto start and return)
Driveinternal belt · electronically controlled DC motor
Speeds33⅓ / 45 rpm, electronic speed selection
Platter12″ die-cast aluminium
Tonearmnot specified by manufacturer
Cartridge (fitted)Audio-Technica AT3600
Phono preampyes (MM, switchable)
Auto shut-offautomatic
Power supplyexternal mains adaptor (110–230 V, 50–60 Hz)
Dimensions420 × 141 × 360 mm (W × H × D)
Weight5.4 kg

Source: Thorens – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Matching tips

  • Upgrade path: stylus replacement or a later cartridge change
  • More features: Thorens TD 102 A with AT-VM95E
  • Built-in phono can be switched off if an external preamp is available

Why (guidance only)

Thorens automatic turntable with phono, ready to play straight away.

Vinyl BotPro Index

45 out of 100 · Starter tier · Prices change, check the market price before buying.

Short analysis by Vinyl BotPro (AI) · as of Oct. 2026 · Corrections: see the legal notice (German)

Manufacturer and concept

Thorens is one of the oldest names in turntable history. The company was founded in Switzerland in 1883 and is now based in Germany. It became famous for decks such as the TD 124 and the TD 160. Alongside expensive turntables, the brand now offers a range of automatic models. The TD 101 A is the most affordable of them and the entry point to the Thorens world.

The concept is plug and play: the TD 101 A comes with a mounted and aligned cartridge, a switchable phono preamp and full automation. Set it up, connect it to an amplifier or powered speakers, put on a record and press start. No tracking force or anti-skate adjustment is needed to get going.

The technology explained

Full automation

On an automatic turntable, the tonearm moves to the lead-in groove at the press of a button, lowers itself and returns to its rest at the end of the record. Then the motor switches off. That protects stylus and records, because the arm does not have to be cued by hand and the stylus does not circle in the run-out groove. For newcomers, children or anyone listening while doing other things, this is a real advantage.

Drive and platter

Thorens specifies an internal belt with an electronically controlled DC motor. The belt runs beneath the platter and is not visible from outside. It decouples the motor from the platter, so motor vibration barely reaches the stylus. The 12-inch platter is die-cast aluminium. Speeds of 33⅓ and 45 rpm are selected electronically, so unlike some entry-level decks you do not have to move the belt.

Cartridge and phono preamp

An Audio-Technica AT3600 is fitted at the factory, a simple MM cartridge with a conical stylus found on many entry-level decks. The built-in MM phono preamp can be switched on or off. When it is on, the turntable outputs a line-level signal and can be connected to any amplifier input or to powered speakers. When it is off, the TD 101 A outputs the unamplified phono signal, which then needs an external phono stage or the amplifier's phono input.

Manufacturer data

According to Thorens, the TD 101 A measures 420 × 141 × 360 mm (W × H × D) and weighs 5.4 kg. Power comes from an external mains adaptor for 110–230 V. According to the data sheet, the box includes the mains adaptor, an acrylic dust cover and RCA cables. The plinth has a black structured finish. Thorens gives no tonearm details in the data sheet.

Sound according to international experience

We found no in-depth reviews of the TD 101 A from major international magazines. A user review on MusicNGear describes the sound with the AT3600 as clean and composed: voices are clearly to the fore, the treble is crisp without being brittle, and the bass is controlled but not especially powerful. The built-in phono stage is said to sound neutral at normal levels and preserve the record's dynamics.

As limits, the review names the simple cartridge and the built-in phono stage: with a better separate phono stage, playback became noticeably clearer. We did not carry out our own listening or measurement tests; this assessment is based on that source and the manufacturer's data.

What a phono preamp does

Records are not cut with a flat response. During cutting, low frequencies are reduced and high frequencies boosted so the grooves do not get too wide and noise stays low. This curve is called RIAA. On playback it must be reversed: the phono preamp restores the bass, reduces the treble and amplifies the very weak cartridge signal to line level. Without a phono preamp, a record sounds thin, tinny and very quiet.

Many modern amplifiers, soundbars and powered speakers no longer have a phono input. That is why a built-in, switchable phono preamp like the one on the TD 101 A is practical: it makes the turntable compatible with almost any system. Because it can be switched off, it does not block the path to a better external solution.

First steps after unpacking

After unpacking, remove all transport locks and protective films as described in the manual. Then fit the platter if it is packed separately and check that the drive belt sits correctly. Remove the stylus guard only just before the first play. Next, connect the mains adaptor and RCA cables and set the phono switch to suit the amplifier input.

A first test with a record in good condition shows whether everything works: the arm should land cleanly in the lead-in groove, and playback should be steady and free of hum. If there is hum, it often helps to route the cables away from mains leads or to connect a ground wire if the amplifier has a ground terminal.

What the Thorens name means

With an entry-level deck, you also pay for the name. The TD 101 A sells in a price class where Denon, Pro-Ject, Sony and Audio-Technica also offer automatic turntables with phono preamps. Technically, these models differ less than brand perception suggests. Points in the TD 101 A's favour are its clean design, the die-cast aluminium platter and electronic speed change. If the brand does not matter to you, compare the alternatives in the same price class.

Upgrade paths

The easiest route to more detail is a better cartridge. The tonearm takes half-inch mount cartridges, so other MM cartridges fit too. An obvious choice is an Audio-Technica cartridge from the VM95 series with an elliptical stylus; the larger TD 102 A ships with such a cartridge. When changing cartridge, tracking force and anti-skate must be set again. If you would rather not do this yourself, have a dealer do the swap.

The second upgrade path is an external phono stage. Switch off the internal preamp and connect the turntable to the external stage. Suitable models are in our best phono preamps list. For a start, though, the built-in solution is enough; an upgrade only pays off once amplifier and speakers can reveal the extra potential.

Placement and connection

The TD 101 A should stand on a stable, level surface that does not resonate. A separate piece of furniture or a wall shelf is ideal, because speakers on the same surface transmit vibration. A spirit level shows whether the platter is level. Keep the dust cover closed while listening so no dust settles on record and stylus.

To connect to an amplifier without a phono input or to powered speakers, leave the internal phono stage on. If the amplifier has a phono input, you can try both options. Important: never apply the RIAA correction twice. With the internal preamp active, the cable belongs in a line input such as AUX or CD, not the phono input, or the sound will be distorted and too loud.

Caring for stylus and records

Clean the stylus regularly with a soft stylus brush, from back to front. Records stay cleaner if you dust them with a carbon-fibre brush before playing and put them straight back in their inner sleeves afterwards. A worn stylus sounds dull and damages the grooves; with simple conical styli, a replacement after a few hundred hours of play is advisable.

Strengths and limits at a glance

Who it suits

The TD 101 A suits newcomers who want to play records conveniently without dealing with adjustments and who value a well-known brand. It also works as a second deck for the living room or for families with children. It is less suited to listeners seeking maximum resolution or wanting to fine-tune the tonearm; they are better served by a manual turntable.

Compared with alternatives

All models are listed with index and price in our best automatic turntables list.

More questions about the Thorens TD 101 A

Can I connect the TD 101 A to powered speakers?

Yes. With the phono preamp switched on, it outputs a line-level signal that powered speakers can handle directly.

Can I change the cartridge?

Yes, the tonearm takes half-inch mount cartridges. After the swap, tracking force and anti-skate must be set.

What is the difference between the TD 101 A and TD 102 A?

The TD 102 A comes with a better cartridge and higher-grade equipment. Both are automatic turntables with a phono preamp.

Does it play 45 rpm singles?

Yes, 33⅓ and 45 rpm are selected electronically. 78 rpm is not supported.

Do I need an amplifier with a phono input?

No. With the internal phono preamp on, any line input such as AUX or CD will do. A phono input is only needed if the internal preamp is switched off.

When does the stylus need replacing?

That depends on use and record care. If playback sounds dull or distorted, it is time. With simple conical styli, expect a few hundred hours.

Verdict

The Thorens TD 101 A is a simple, convenient way into vinyl: full automation, a phono preamp and an aligned cartridge make it ready to play straight away. Its sound is described as clean and balanced; the main limits are the cartridge and built-in phono stage. If you want more later, you can upgrade both. That way the TD 101 A grows with your expectations: first an easy start, later a better cartridge or an external phono stage, without replacing the whole turntable.

Sources