Compatibility · Oct 2026

Ortofon OM 10 on the Thorens TD 202: does it fit?

We worked through the tonearm of the Thorens TD 202 (Thorens TP 71, 14 g effective mass) and the cartridge Ortofon OM 10 (5 g) with the calculation method of our Advisor. Result: borderline, calculated resonance 7.1 Hz. Orientation only; check the manufacturer’s specifications; errors excepted.

Verdict: borderline Resonance 7.1 Hz Orientation · errors excepted Updated 3 Oct 2026

Verdict: borderline

Borderline: at least one point is at the edge. Checks at the edge: Resonance.

  • Resonance: 7.1 Hz
  • Moving mass: 20 g
  • Compliance: 25 µm/mN at 10 Hz
  • Cartridge: 5 g

The OM 10 weighs 5 g and thus fits the TD 202’s counterweight (3.5 to 6 g). The catch is the resonance: the heavy arm (14 g, per a magazine measurement) and the soft suspension of the OM 10 (25 µm/mN) give 7.1 Hz, just above the warning limit of 7 Hz. A stiffer cartridge helps here; among the cases calculated for the TD 202, the OM 10 is still the least problematic.

Resonance band: Ortofon OM 10 on Thorens TD 202 Scale 5 to 15 Hz. Target zone 8 to 12 Hz, warning outside 7 to 14 Hz. Calculated resonance 7.1 Hz. 5 6 7 8 9 10 11 12 13 14 15 Resonance frequency in Hz Target 8–12 Warning from 7 to 14 7.1 Hz
Calculated resonance compared with the target zone (green: 8–12 Hz) and the warning zone (yellow: 7–14 Hz).

The calculation in detail

Three points decide whether a cartridge fits a tonearm: the mounting, the resonance of arm and cartridge, and the counterweight. The overall verdict is as strict as the weakest point.

  • Mountingfits

    The cartridge has the usual half-inch mounting (two screws, hole spacing ½ inch), and the arm’s headshell is designed for it.

    Advisor output: Removable headshell; half-inch standard (assumption for standard cartridges, source Wikipedia “Tonearm”).

  • Resonanceborderline

    The resonance of 7.1 Hz is below the target zone. Low resonances react more strongly to warped records and footfall; below 7 Hz this counts as a warning, not as an exclusion.

    Advisor output: fᵣ ≈ 7.1 Hz by 159 / √(20 × 25); target 8–12 Hz, warning outside 7–14 Hz. Mass 14 g arm + 5 g cartridge + 1 g screws = 20 g; compliance 25 µm/mN (10 Hz, per data sheet). Calculation note, not a measurement.

  • Counterweightfits

    The arm’s counterweight covers the cartridge: 5 g lies within the range 3.5–6 g.

    Advisor output: Cartridge 5 g is within the range 3.5–6 g (cartridge weight (Thorens data sheet: 3.5–6.0 g)).

How the resonance comes about

  1. Moving mass: 14 g arm + 5 g cartridge + 1 g screws = 20 g.
  2. Compliance at 10 Hz: The compliance of 25 µm/mN is specified at 10 Hz and is used unchanged.
  3. Formula: fᵣ = 159 / √(mass × compliance) = 159 / √(20 × 25) = 159 / √500 ≈ 7.1 Hz.

The input data

Tonearm: Thorens TP 71 (Thorens TD 202)

Effective mass
14 g · lab measurement by a trade magazine (not a manufacturer value), source: hifinews.com
Mounting
removable headshell
Counterweight
3.5–6 g · cartridge weight (Thorens data sheet: 3.5–6.0 g)

Cartridge: Ortofon OM 10

Type
MM · elliptical bonded r/R 8/18 µm
Weight
5 g
Compliance
25 µm/mN at 10 Hz
Tracking force
1.25–1.75 g · recommended 1.5 g
Output voltage
4 mV
Market price
about €55–85 (prices without guarantee, Oct 2026)

According to the manufacturer the Thorens TD 202 ships with a different cartridge (Audio-Technica AT-95E (MM)). The calculation here therefore describes a swap, i.e. an upgrade scenario.

What this means for you

  • Check the highlighted points above (Resonance) in the manufacturer’s documents.
  • If needed, ask a dealer or the manufacturer whether the combination is recommended in everyday use.
  • If you are unsure, look for a cartridge that passes all three checks (see the alternatives below).

The Ortofon OM 10 is a moving-magnet cartridge (4 mV) and works on a normal MM phono input. If the Thorens TD 202 has no built-in phono stage or the amplifier has no phono input, the top list of phono preamps helps.

Alternatives

Our tip: On the Pro-Ject Essential III the OM 10 comes in the box and calculates to 8.5 Hz with 8 g of arm mass.

The Ortofon OM 10 on other turntables

On these turntables the Ortofon OM 10 passes all three checks according to the calculation:

Method in brief

Procedure
As in the Advisor: resonance fᵣ = 159 / √(mass × compliance), target 8–12 Hz, warning outside 7–14 Hz. Mass = arm mass + cartridge weight + 1 g screws. 100 Hz values are converted with 1.5–2.2.
Verdict rule
One point outside: “does not fit”. Mounting or resonance not verifiable: “not verifiable”. One point at the edge: “borderline”. Otherwise “fits”.
Data
Advisor data of 2 Oct 2026, page of 3 Oct 2026
Limits
No measurement, no guarantee. Orientation only; check the manufacturer’s specifications; errors excepted.

Frequently asked questions

Does the Ortofon OM 10 fit the Thorens TD 202?

With reservations. The Ortofon OM 10 on the Thorens TD 202 is borderline; Resonance is at the edge of the target zone. Calculated resonance: 7.1 Hz. Orientation only; check the manufacturer’s specifications; errors excepted.

How high is the resonance of the Ortofon OM 10 and the Thorens TD 202?

About 7.1 Hz. The calculation uses 159 / √(mass × compliance): 20 g moving mass (arm 14 g, cartridge 5 g, screws 1 g) and 25 µm/mN at 10 Hz. The target zone is 8–12 Hz; a warning applies outside 7–14 Hz.

Is the counterweight of the Thorens TD 202 sufficient for the Ortofon OM 10?

The arm’s counterweight covers the cartridge: 5 g lies within the range 3.5–6 g.

What is fitted to the Thorens TD 202 at the factory?

According to the manufacturer the Thorens TD 202 ships with a different cartridge (Audio-Technica AT-95E (MM)). The calculation here therefore describes a swap, i.e. an upgrade scenario.

How reliable is this calculation?

It is an orientation, not a measurement. The arm mass comes from a lab measurement by a trade magazine (not a manufacturer value), the compliance from the manufacturer’s data sheet. Data as of 2 Oct 2026. Check the manufacturer’s specifications; errors excepted.

Orientation only; check the manufacturer’s specifications; errors excepted. Calculation by the AI Vinyl BotPro based on manufacturer data, without listening test and without measurement, not purchase advice in the legal sense. Notices & liability

Updated 3 Oct 2026 · Advisor data 2 Oct 2026 · Prices without guarantee, Oct 2026