Compatibility · Oct 2026
Audio-Technica AT-VM95E on the Pro-Ject Essential III: does it fit?
We worked through the tonearm of the Pro-Ject Essential III (Pro-Ject 8.6 aluminium, 8 g effective mass) and the cartridge Audio-Technica AT-VM95E (6.1 g) with the calculation method of our Advisor. Result: borderline, calculated resonance 11.5 Hz (range 10.4–12.6 Hz). Orientation only; check the manufacturer’s specifications; errors excepted.
Verdict: borderline
Borderline: at least one point is at the edge. Checks at the edge: Counterweight.
- Resonance: 11.5 Hz (range 10.4–12.6 Hz)
- Moving mass: 15.1 g
- Compliance: 12.6 µm/mN at 10 Hz
- Cartridge: 6.1 g
Here weight alone decides. The AT-VM95E weighs 6.1 g, while the supplied counterweight No. 00 only compensates up to 5.5 g. With the optional counterweight No. 01 for 6 to 9 g the cartridge can be balanced. The middle of the resonance range, about 11.5 Hz, lies in the target zone, the upper end reaches 12.6 Hz, and mounting is uncritical. “Borderline” here means: feasible, but only with an accessory that is not in the box.
The calculation in detail
Three points decide whether a cartridge fits a tonearm: the mounting, the resonance of arm and cartridge, and the counterweight. The overall verdict is as strict as the weakest point.
-
Mountingfits
The cartridge has the usual half-inch mounting (two screws, hole spacing ½ inch), and the arm’s headshell is designed for it.
Advisor output: Fixed headshell with half-inch mounting holes (manufacturer: cartridges with a half-inch mount fit).
-
Resonancefits
The calculated resonance of 11.5 Hz lies in the target zone. The rule-of-thumb range stays within the warning limits.
Advisor output: fᵣ ≈ 11.5 Hz (range 10.4–12.6 Hz) by 159 / √(15.1 × 12.6); target 8–12 Hz, warning outside 7–14 Hz. Mass 8 g arm + 6.1 g cartridge + 1 g screws = 15.1 g; compliance 7 ·10⁻⁶ cm/dyn at 100 Hz × 1.5–2.2 ≈ 10.5–15.4 µm/mN at 10 Hz (rule of thumb, middle 12.6). Calculation note, not a measurement.
-
Counterweightborderline
With the standard counterweight (3.5–5.5 g) the cartridge (6.1 g) cannot be balanced. The manufacturer names an auxiliary weight for 6–9 g; that makes it possible, but it is no longer the normal case.
Advisor output: Cartridge 6.1 g only with auxiliary weight (6–9 g).
How the resonance comes about
- Moving mass: 8 g arm + 6.1 g cartridge + 1 g screws = 15.1 g.
- Compliance at 10 Hz: The compliance of 7×10⁻⁶ cm/dyn is specified at 100 Hz. For 10 Hz the rule of thumb is 1.5 to 2.2 times that, i.e. 10.5 to 15.4 µm/mN; the calculation uses the middle (factor 1.8): 12.6 µm/mN.
- Formula: fᵣ = 159 / √(mass × compliance) = 159 / √(15.1 × 12.6) = 159 / √190.3 ≈ 11.5 Hz.
- Range: Because the compliance is converted, the result is 10.4–12.6 Hz (worst and best case).
The input data
Tonearm: Pro-Ject 8.6 aluminium (Pro-Ject Essential III)
- Effective mass
- 8 g · manufacturer figure, source: our own test page test-pro-ject-essential-iii.html (manufacturer: effective mass 8.0 g)
- Mounting
- fixed headshell with half-inch mount
- Counterweight
- 3.5–5.5 g, with auxiliary weight 6–9 g · cartridge weight (Pro-Ject: supplied counterweight No. 00 for 3.5–5.5 g; optional No. 01 for 6–9 g)
Cartridge: Audio-Technica AT-VM95E
- Type
- VM Dual-MM · elliptical bonded 0.3×0.7 mil
- Weight
- 6.1 g
- Compliance
- 7×10⁻⁶ cm/dyn at 100 Hz
- Tracking force
- 1.8–2.2 g · recommended 2.0 g
- Output voltage
- 4 mV
- Market price
- about €55–70 (prices without guarantee, Oct 2026)
The Pro-Ject Essential III ships with the Ortofon OM 10. The calculation here therefore describes a swap, i.e. an upgrade scenario.
What this means for you
- Check the highlighted points above (Counterweight) in the manufacturer’s documents.
- If needed, ask a dealer or the manufacturer whether the combination is recommended in everyday use.
- If you are unsure, look for a cartridge that passes all three checks (see the alternatives below).
The Audio-Technica AT-VM95E is a moving-magnet cartridge (4 mV) and works on a normal MM phono input. If the Pro-Ject Essential III has no built-in phono stage or the amplifier has no phono input, the top list of phono preamps helps.
Alternatives
Our tip: Anyone who does not want to buy an auxiliary weight can choose the Ortofon OM 5E (about €45–70): 5 g fit the supplied counterweight, and the resonance is 9.5 Hz.
More cartridges on the Pro-Ject Essential III
According to the calculation these cartridges pass all three checks on the Pro-Ject Essential III and cost roughly the same according to our test pages (prices without guarantee):
- Ortofon OM 5E: calculated resonance 9.5 Hz, 5 g, about €45–70
- Ortofon 2M Red: calculated resonance 8.8 Hz, 7.2 g, about €85–100
The Audio-Technica AT-VM95E on other turntables
On these turntables the Audio-Technica AT-VM95E passes all three checks according to the calculation:
- Pro-Ject Primary E: calculated resonance 11.5 Hz, arm 8 g
- Pro-Ject T2 W: calculated resonance 11 Hz, arm 9.5 g
- Pro-Ject RPM 5 Carbon: calculated resonance 11.5 Hz, arm 8 g
- Technics SL-1200GR2: calculated resonance 11.3 Hz, arm 8.5 g
Method in brief
- Procedure
- As in the Advisor: resonance fᵣ = 159 / √(mass × compliance), target 8–12 Hz, warning outside 7–14 Hz. Mass = arm mass + cartridge weight + 1 g screws. 100 Hz values are converted with 1.5–2.2.
- Verdict rule
- One point outside: “does not fit”. Mounting or resonance not verifiable: “not verifiable”. One point at the edge: “borderline”. Otherwise “fits”.
- Data
- Advisor data of 2 Oct 2026, page of 3 Oct 2026
- Limits
- No measurement, no guarantee. Orientation only; check the manufacturer’s specifications; errors excepted.
Frequently asked questions
Does the Audio-Technica AT-VM95E fit the Pro-Ject Essential III?
With reservations. The Audio-Technica AT-VM95E on the Pro-Ject Essential III is borderline; Counterweight is at the edge of the target zone. Calculated resonance: 11.5 Hz (range 10.4–12.6 Hz). Orientation only; check the manufacturer’s specifications; errors excepted.
How high is the resonance of the Audio-Technica AT-VM95E and the Pro-Ject Essential III?
About 11.5 Hz (range 10.4–12.6 Hz). The calculation uses 159 / √(mass × compliance): 15.1 g moving mass (arm 8 g, cartridge 6.1 g, screws 1 g) and 12.6 µm/mN at 10 Hz. The target zone is 8–12 Hz; a warning applies outside 7–14 Hz.
Is the counterweight of the Pro-Ject Essential III sufficient for the Audio-Technica AT-VM95E?
With the standard counterweight (3.5–5.5 g) the cartridge (6.1 g) cannot be balanced. The manufacturer names an auxiliary weight for 6–9 g; that makes it possible, but it is no longer the normal case. Check the manufacturer’s specification before buying.
What is fitted to the Pro-Ject Essential III at the factory?
The Pro-Ject Essential III ships with the Ortofon OM 10. The calculation here therefore describes a swap, i.e. an upgrade scenario.
How reliable is this calculation?
It is an orientation, not a measurement. The arm mass comes from a manufacturer figure, the compliance from the manufacturer’s data sheet, converted with a rule of thumb (factor 1.5–2.2 for 100 Hz values). Data as of 2 Oct 2026. Check the manufacturer’s specifications; errors excepted.
Orientation only; check the manufacturer’s specifications; errors excepted. Calculation by the AI Vinyl BotPro based on manufacturer data, without listening test and without measurement, not purchase advice in the legal sense. Notices & liability
Updated 3 Oct 2026 · Advisor data 2 Oct 2026 · Prices without guarantee, Oct 2026