Over-ear headphones · AI analysis · Expert, rank 3

Sennheiser HD 660S2 Review

AI analysis (research): open-back, 300 Ω, 104 dB SPL (1 kHz, 1 Vrms) — manufacturer specifications, measurement sources and retailer prices, no listening test.

AI research Expert Index 80 / 100 Price as of Sept 2026
Sennheiser HD 660S2 review, over-ear headphones
Photo: manufacturer Sennheiser · product photo for illustration only.
Sennheiser HD 660S2 (2/4) — manufacturer photo
Photo: manufacturer Sennheiser · additional product photo.
Sennheiser HD 660S2 (3/4) — manufacturer photo
Photo: manufacturer Sennheiser · additional product photo.
Sennheiser HD 660S2 (4/4) — manufacturer photo
Photo: manufacturer Sennheiser · additional product photo.

Summary

Sennheiser HD 660S2 (open-back, 300 Ω): dynamic (38 mm). Price: approx. €445–499 · price as of Sept 2026. The HD 660S2 is open-back, 300 Ω, with two cables. Sources report more sub-bass than on the 600-series predecessors and a resonance at around 70 Hz.

Assumptions

  • Prices: consumer prices incl. VAT, as of Sept 2026 (manufacturer or retailer page); they may change
  • Details from the manufacturer’s website or datasheet, or the retailer’s page; availability may vary by variant
  • No measurements or listening tests of our own; statements about sound reflect published measurements and reviews

Specs (public / manufacturer)

Designopen-back
Driver typeDynamic (38 mm)
Impedance300 Ω
Sensitivity104 dB SPL (1 kHz, 1 Vrms)
Weight260 g
Cable / connectorTwo detachable cables, 1.8 m: 6.3 mm unbalanced and 4.4 mm symmetrical; adapter 6.3→3.5 mm
Price guideSennheiser EU-Shops approx. €445–499 per country (uncertain) · Price as of Sept 2026
Note on the data basisPrices per EU country vary (€445–499); noted as guidance.
Manufacturer specifications (Sennheiser)
Manufacturer data sheet
Headphone typeopen, dynamic, over-ear; 38 mm transducer
Impedance300 Ω
Sensitivity104 dB SPL (1 kHz, 1 Vrms)
Frequency response8–41,500 Hz
Distortionnot specified by manufacturer
Cable2 cables, 1.8 m each: 6.3 mm and 4.4 mm balanced; 6.3 → 3.5 mm adapter
Magnetic field4.5 mT
Weight260 g

Source: Sennheiser – official specifications · As of 16 October 2026 · subject to change by the manufacturer

Amp compatibility

300 Ω · 104 dB SPL (1 kHz, 1 Vrms) · open-back.

300 Ω: headphone amplifier or strong amplifier output useful; symmetrical 4.4 mm connector for matching amplifiers.

Headphone output on an integrated amplifier: according to their manufacturers, several models in the amplifier top list have a headphone output, including the Naim Nait XS 3, Hegel H190v, NAD C 368, McIntosh MA352, Rega Elicit MK5 and Yamaha A-S501. We have not checked the output power and output impedance of these outputs; the impedance and sensitivity above help with classification. For the signal path from the turntable: phono preamps · turntables.

Scores in detail

Sound data basis
good measurement data and several expert verdicts
8.3
Build quality / comfort
solid to high-quality build, comfort documented
7.8
Drive / amp compatibility
benefits from a headphone amplifier
6.2
Value for money
solid ratio of sound data basis to price
7.7
Vinyl BotPro Index
Weighted 35/20/15/30, then scaled across all tiers
80

Vinyl BotPro Index: 80 (Expert 70–84) · Sub-scores 0–10 from sound data basis, build quality and comfort, drive and amplifier compatibility, and value for money (weights 35/20/15/30) · Guidance only, not a lab value.

Strengths

  • More sub-bass than HD 600/650 according to sources
  • Symmetric cable included
  • Very low distortion (datasheet)

Weaknesses

  • More gradual gains compared to the 600 series
  • 300 Ω: needs voltage swing

Comparison models

Meze Audio 109 PROopen-back · 40 Ω · 799 €
beyerdynamic T1 (generation 3)open-back · 32 Ω · 740 €
beyerdynamic DT 1990 PRO MKIIopen-back · 30 Ω · 539 €

System matching

Works well with

  • Headphone amplifier (also symmetrical)
  • If you want the 600 voicing with more bass extension

Less suited

  • Weak outputs

Technology in detail

Open-back 300 Ω dynamic headphones with more sub-bass than the 600 series and a balanced cable. Design: open-back, driver type: dynamic (38 mm), impedance 300 Ω, sensitivity 104 dB SPL (1 kHz, 1 Vrms), weight 260 g. Cable: Two detachable cables, 1.8 m: 6.3 mm asymmetrical and 4.4 mm symmetrical; adapter 6.3→3.5 mm. 300 Ω: headphone amplifier or strong amplifier output useful; symmetrical 4.4 mm connector for matching amplifiers.

What the specialist press says

Headfonics and Headphone Corner describe the HD 660S2 as a refined continuation of the 600 line: more sub-bass, a resonance shifted down to around 70 Hz and very low distortion. The expert verdicts see the progress over the HD 600/650 as incremental rather than a leap.

Sennheiser delivers two cable, one symmetrical (4.4 mm). This is practical for amplifier set-ups with a balanced headphone output. Prices vary by EU country, so the figure should be read as a range.

VinylCination presents this here as an AI summary of the specialist press, with no claim of a partnership.

Who is it for?

For listeners who want the Sennheiser classic with more bass and a balanced connection option on a headphone amplifier.

The special features of this analysis

This AI analysis brings together manufacturer specifications, technical data and the verdicts of the specialist press in a compact assessment. It shows where the sources agree, which strengths come up again and again, and which system the product suits best. Prices as of Sept 2026.

How the score comes about

Vinyl BotPro Index 0–100; Expert ~70–84. Sennheiser HD 660S2: 80 (rank 3 in the tier). Weights 35/20/15/30 for sound data basis, build quality and comfort, drive and amplifier compatibility, and value for money. Rank is not a lab test; champion titles are AI assessments, not listening-test results. Details · Methodology.

Sources

Created by Vinyl BotPro (AI) · As of Sept 2026 · All information is provided without guarantee; prices change and manufacturer specifications may differ.