Turntable · AI analysis · Starter, rank 22
Rega Planar 1 Plus Review
AI analysis (research): Rega's Planar 1 with a built-in MM phono stage for direct connection; based on manufacturer data and the international specialist press.





Summary
The Planar 1 Plus (approx. 400–500 €) is Rega's Planar 1 with a built-in MM phono stage. This means it works with any line input. It also has the RB110 tonearm, a pre-mounted Rega Carbon and a heavy phenolic platter. The international specialist press awarded five stars.
Specs (public / manufacturer)
| Drive | Belt (EBLT) · 24 V synchronous motor · 33⅓/45 rpm (move the belt) |
|---|---|
| Platter / bearing | Phenolic resin · 23 mm · brass bearing |
| Tonearm | RB110, hand-assembled · anti-skating preset |
| Cartridges | Rega Carbon (MM, pre-mounted) |
| Phono | MM phono stage built in · line-level output |
| Finishes | Matt black · Matt white · Walnut effect |
| Dimensions / weight | 447 × 117 × 360 mm (lid closed) · 4.35 kg |
Manufacturer specifications (Rega)
| Type | Manual turntable with integrated MM phono stage |
|---|---|
| Drive | belt (EBLT) · 24 V low-noise synchronous motor |
| Speeds | 33⅓ / 45 rpm (move belt on pulley) |
| Platter | 23 mm high-mass phenolic resin (flywheel effect) |
| Tonearm | hand-assembled RB110 |
| Cartridge (fitted) | Rega Carbon (MM), factory-fitted |
| Phono preamp | integrated (MM) · gain 40 dB · input 47 kΩ ∥ 220 pF · output 370–410 mV (3.54 cm/s), 1 kΩ · 14 Hz (−3 dB) to 100 kHz (−0.6 dB) · RIAA ±0.4 dB (typically better than ±0.25 dB) · S/N −75 dB(A) ref. max. output |
| Power supply | 24 V AC · 3.4 W (50 Hz) |
| Dimensions | 447 × 117 × 360 mm (W × H × D, lid closed) |
| Weight | 4.35 kg |
Source: Rega – official specifications · As of 16 October 2026 · subject to change by the manufacturer
Matching tips
- Good fit: Amplifiers without a phono input
- Good fit: Active speakers with line input
- Good fit: Beginners who want to adjust little
- Less suited: Anyone who already owns a good external phono stage
- Less suited: Anyone who wants to change speed at the push of a button
Why (guidance only)
Planar 1 with built-in MM phono stage, factory-set.
Note
AI analysis based on manufacturer data and the trade press, without our own listening session. Prices change — check the price date.
Technology in detail
The Planar 1 Plus adopts the technology of the Planar 1 and adds a high-quality MM phono stage. It raises the cartridge signal to line level. This lets the turntable connect to any amplifier, active speaker or compact system with a line input.
A 24 V synchronous motor with a new control board and aluminium pulley drives the platter via the EBLT belt. The 23 mm phenolic platter acts like a flywheel and keeps the speed stable. For 45 rpm, you move the belt to the second step of the pulley.
The RB110 tonearm is hand-assembled and has particularly low-friction bearings. Anti-skating is factory-set for the pre-mounted Rega Carbon. The brass main bearing and new feet reduce vibration.
What the specialist press says
Another review gave the Planar 1 Plus five stars.
One international review named it the winner of a group test in 2024.
Who is it for?
For beginners looking for an easy-to-connect turntable without a separate phono preamp.
What makes this AI analysis special
This AI analysis combines Rega's specifications and manual with the ratings in international reviews. All measurements are manufacturer specifications. As of October 2026.
How the score comes about
The index reflects the built-in phono stage, the RB110 tonearm with Rega Carbon, the simple setup and the very good ratings in international reviews. The Vinyl BotPro Index on this page remains 44 (Starter, rank 22) — guidance from manufacturer data and the specialist press, no in-house listening session. The four criteria engineering/build, features, expected performance and value for money are weighted 25/20/25/30 and scaled across all tiers. Methodology
AI analysis by Vinyl BotPro (AI) · As of Sept 2026 · Corrections: info@vinylcination.de
Manufacturer and concept
Rega has been building turntables in Southend-on-Sea since 1973 and is known for a clear philosophy: little mass, high rigidity, as little adjustment as possible. The Planar 1 has been Rega's entry into this world for years. The Planar 1 Plus takes over its deck and adds a built-in MM phono stage. This means it can be connected directly to any line input, to an amplifier without a phono input, to active speakers or to a compact system. In our top list it sits in 22nd place in the Starter tier with an index of 44.
The idea behind it is simple: many beginners no longer own a classic amplifier with a phono input. Instead of buying and wiring a separate phono stage, the Plus already has one inside. The rest is typical Rega: arm and cartridge are set at the factory, and the deck is ready within minutes.
Technology explained
24 V synchronous motor and EBLT belt
A low-noise 24 V synchronous motor with its own control board drives the platter via an EBLT belt. The pulley is made of aluminium. For 45 rpm the belt is moved by hand to the second step of the pulley. That is less convenient than a button but keeps the electronics simple.
Phenolic platter as a flywheel
The 23 mm thick platter is made of phenolic resin and has comparatively high mass. It acts like a flywheel: once moving, its inertia smooths out small fluctuations of the motor. The main bearing is made of brass.
RB110 tonearm, hand-assembled
The RB110 is a hand-assembled arm with particularly low-friction bearings. Anti-skating is preset at the factory for the pre-fitted cartridge. The counterweight is designed so that the tracking force for the Rega Carbon is right in a few steps. If you just want to play records, there is practically nothing to adjust on the arm.
Rega Carbon MM
Factory-fitted is the Rega Carbon, an MM cartridge Rega selects specifically for its entry-level models. It is already aligned, so overhang and alignment are correct.
Built-in MM phono stage
The integrated phono stage raises the signal to line level. Rega specifies 40 dB gain and 47 kΩ input impedance, the usual values for MM cartridges. The output is on the rear, next to the ground terminal. The manufacturer information mentions no way of bypassing the phono stage; anyone who wants to use an external stage is better served by the standard Planar 1.
Line instead of phono: why the concept often fits today
A cartridge delivers only a few millivolts and a heavily bent frequency curve, because bass is reduced and treble boosted when records are cut. The phono stage reverses this so-called RIAA curve and raises the level. In the past, almost every amplifier had its own input for this. Today, many compact systems, soundbars and active speakers lack it.
This is where the Planar 1 Plus comes in. With its built-in phono stage, it delivers a finished line signal that any AUX input understands. That saves an extra device, a power supply and a cable. The downside: the phono stage is a fixed part of the chain. Anyone who wants to upgrade later tends to replace the whole deck rather than individual components.
Design and finishes
Rega offers the Planar 1 Plus in matt black, matt white and a walnut finish. The flat plinth, the dark phenolic platter and the slim RB110 give it the typical, understated Rega face. With a footprint of 447 × 360 mm and the lid closed, it fits most sideboards.
Set-up and installation
Fit the platter, place the belt over the pulley, screw on the counterweight, hang the lid: little more is needed. Rega describes in the manual how to position the counterweight for the Carbon. Then the deck is connected to a line input and the power supply plugged in.
Rega decks are light and therefore sensitive to their support. Ideal is a light, rigid piece of furniture or a wall shelf, never a springy wooden floor without isolation. Distance from the speakers also helps.
How the press assesses the sound
The Planar 1 Plus has received very good verdicts in the press evaluated, including a top rating and a group test win. For this analysis, mainly the ratings themselves were available; we therefore do not reproduce individual sound descriptions. This assessment summarises third-party listening tests; no own listening test exists.
Upgrade path for the Rega Planar 1 Plus
With the Planar 1 Plus, the upgrade path is deliberately narrow. The Carbon can be replaced with a higher-grade Rega cartridge such as the Nd3. Because the phono stage is built in, it remains part of the chain. Anyone who wants to experiment with a separate phono stage in the long term is more flexible with the Planar 1 or the Planar 2.
Planar 1 or Planar 1 Plus?
Many beginners face this question. Both use the same deck with RB110 and Carbon. The Planar 1 needs a phono stage in the amplifier or as a separate unit. The Plus brings its own and therefore fits any line input. If you own an amplifier with a good phono input, the standard Planar 1 is the better fit. If you use active speakers or a compact system without phono, the Plus saves you a device and a cable.
Comparison with the neighbours in the top list
- Rega Planar 1 (index 54, sound champion of the Starter tier): the same deck without a built-in phono stage.
- Rega Replay (index 52): Rega's skeletal entry-level deck.
- Denon DP-400 (index 45): semi-automatic with phono and 78 rpm.
- Yamaha TT-S303 (index 43): simple belt drive with switchable phono.
- Pro-Ject T1 Phono SB (index 52): belt drive with switchable phono and electronic speed control.
Who it suits
The Planar 1 Plus suits beginners who want to play records without detours: unpack, connect, play. It makes particular sense with active speakers, compact systems and amplifiers without a phono input. It is less suitable for anyone who already owns a good external phono stage or wants to change speed at the push of a button.
Goes well with the Rega Planar 1 Plus: amplifiers and speakers
For the Rega Planar 1 Plus to show its potential, the right partners matter. These models from our top lists complement it well according to the available data.
Amplifier
- Rega io: compact amplifier from the same brand
- Yamaha A-S301: integrated amplifier with line inputs
All models in the amplifier top list.
Active speakers
- Q Acoustics M20 HD: active speaker with line input
- Fyne Audio Cubitt 5: compact active speaker
Passive speakers
- DALI Spektor 2: compact bookshelf speaker
- Monitor Audio Bronze 50 7G: bookshelf speaker with body
More speakers in the bookshelf speaker top list. All turntables compared in the turntable top list.
Everyday care
A stylus brush and a record brush keep dust away. The Carbon's stylus is a wear part and is replaced when needed. The belt should be checked after a few years. If the deck is moved, a quick look to see whether the belt still sits correctly on the pulley is worthwhile.
More questions about the Rega Planar 1 Plus
Do I need a separate phono preamp?
No. The MM phono stage is built in; the Planar 1 Plus fits any line input.
How do I switch to 45 rpm?
The belt is moved by hand to the second step of the pulley.
What is the difference from the Planar 1?
The deck is the same; the Plus also has a built-in MM phono stage.
Can I connect it to an amplifier with a phono input?
It is intended for line inputs. On a phono input the signal would be equalised twice; for that, the standard Planar 1 is the better choice.
Verdict
The Planar 1 Plus brings Rega's entry-level deck with a built-in MM phono stage and a factory-set arm to any system with a line input. We in the AI Bot editorial team all agree based on the available data: a turntable that packs its own phono stage into 4.35 kg has packed better than we do before every update.
Sources
Read more: best turntables 2026 · What is hi-fi?